Keyword Index

A

  • AA2024 aluminum Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
  • Abrasive Resistance The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
  • Absorber Layer Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • AC electrophoretic deposition Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • Acetone An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
  • Activated carbon Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
  • Additive Manufacturing Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
  • Adsorption and self Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • Agricultural waste Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
  • Air Plasma Spray Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Air plasma spraying (APS) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • Al The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Al3Ni Intermetallic Compound Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
  • Al–4%TiC Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
  • Al-ion batteries Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
  • Alkaline Concrete Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
  • Alkaline fluoride salts Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
  • Alkanes Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • Alloy Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
  • Alumina Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
  • Alumina Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
  • Alumina matrix Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Alumina refractory castable The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
  • Alumina scaffold Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
  • Alumina-zirconia composites Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
  • Alumina-Zirconia-Mullite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • Aluminide Coating Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
  • Aluminum Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Aluminum Alloy The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Aluminum Alloy Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
  • Aluminum alloys Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
  • Aluminum and Graphite The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
  • Aluminum Isopropoxide Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • Aluminum Matrix Composites Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
  • Aluminum nitride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Ammonia Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Amorphous AlPO4 Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
  • Amorphous aluminosilicate phase Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
  • Amorphous silica Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
  • AMZ composites The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • Anode The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
  • Anodized Titanium Dioxide Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • Anodizing Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
  • Anterior cruciate ligament Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
  • Antibacterial property Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
  • Antifouling Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
  • Antimicrobial coatings Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
  • Antireflection Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Aqueous electrolyte Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
  • Atomic force microscopy Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]

B

  • BaF2 Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
  • Ball milling Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Ball milling An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
  • Band gap Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
  • Band gap Investigation on the band gap of centered square phononic crystals [(Articles in Press)]
  • Bandgap Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
  • Band gap engineering Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
  • Barium aluminosilicate Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
  • Barium Fluoride An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
  • Barium titanate The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
  • Battery Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • Bearing Area Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
  • Bearing Area Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
  • Bearing area percentage Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
  • BET Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Bi2O3 Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
  • Bioabsorbable Screws Mechanical Properties Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
  • Bioactive Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • Bioactive Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
  • Bioactive Glass Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Bioactive Glass Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
  • Bioactive glass nanoparticles In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
  • Bioactivity Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
  • Bioactivity In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
  • Biocompatibility Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
  • Biocompatibility Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
  • Biomaterials Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
  • Biomedical applications In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Bioscrews In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
  • Bismuth borate glasses Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
  • Bismuth ferrite Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • BK7 glass Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • BMIm[OH] Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Bond strength Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Bone Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
  • Bone cements Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
  • Bone tissue engineering Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Bone tissue engineering scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
  • Borosilicate glasses Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]

C

  • CaF2 nanocrystals Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
  • Calcination kinetics Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Calcium phosphate cement Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
  • Calcium phosphate glass Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • Calcium titanate Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Canine Animal Model In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
  • Capacitance Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
  • Carbon Fibers Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
  • Carbon Nanotube Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
  • Carbon nanotubes Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Catalyst Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Catalyst Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
  • Catalyst TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
  • Cathode Materials Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
  • Cathode Materials Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
  • Cathodic electrodeposition Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
  • CDS Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • CdTe Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • CdWO4 Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
  • Ce dopant Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
  • Cemented carbide Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Cementitious adhesive Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
  • Cementitious matrix composite Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
  • Centrifuge casting The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • CeO2 Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • Ceramic Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • Ceramic Composite An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Ceramic core Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
  • Ceramic electrode TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
  • Ceramic materials Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • Ceramic/ metals composite Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Chalcogenide Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
  • Chalcogenide glass Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • Characterization Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
  • Chemical Enhanced Oil Recovery (C-EOR) Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
  • Chemical etching Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Chemical properties Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
  • Chemical stability Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
  • Chemical Vapor Deposition Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
  • Chemical Vapor Deposition Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
  • Chloride ion Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
  • Cleaning Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
  • CNT Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • CO Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Coating Cauliflower Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
  • Cobalt ferrite An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
  • Cobalt oxide nanoparticles ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
  • CoFe2O4 Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
  • Cold isostatic pressing Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
  • Cold isostatic pressing Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
  • Combined annual growth rate The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
  • Combustion Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • Composite Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Composite The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Composite Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Composite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • Composite Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Composite Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
  • Composites Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
  • Composites Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
  • Compressability Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
  • Compressibility Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
  • Concentration ratios Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
  • Concrete Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
  • Construction and demolition waste Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • Copper hexacyanoferrate Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
  • Copper oxide Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
  • Cordierite Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Cordierite Glass Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
  • Corrosion behavior Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
  • Corrosion Resistance The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • Cr Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
  • Cristobalite Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
  • Cristobalite Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
  • Crystal Growth Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
  • Crystallization Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • Crystallization Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
  • Crystallization Mechanism Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
  • CTAB Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • Cubical crystal structure Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Cu-Co Films Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
  • CuInAlSe2 Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • CuO/ZnO composite Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
  • Current Density Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
  • Current Density The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
  • CuS Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
  • Cyclic oxidation Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
  • Cyclic Voltammetry Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Cytotoxicity In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]

D

  • Decoration Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
  • Defect The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
  • Degradability, Swelling An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Densification Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Densification Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Densification Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Densification The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
  • Density Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
  • Density functional theory Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
  • Density of states Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
  • Density of states Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
  • Depth profile Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
  • Desalination Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
  • Design expert Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
  • Design for Disassembly (DfD) technique Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • DFT Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • Diamond/WC-Co composite The Role of Diamond on Wear Properties of WC-Co Composite [(Articles in Press)]
  • Dielectric Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
  • Dielectric Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
  • Dielectric Constant Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Dielectric properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
  • Dielectric properties Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
  • Diffusion Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • Diffusion Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
  • Diffusion welding Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
  • Dimethylformamide An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
  • Dispersant The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
  • DLP Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
  • DNA A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
  • Dolapix Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
  • Doping Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
  • Doping The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Doping Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
  • Doping Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
  • Double heterojunction bipolar transistor Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
  • Double Layer Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
  • Dry Reforming TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
  • DSC Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
  • DSC analysis Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Durability Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]

E

  • ECV Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
  • Effective parameter Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
  • Egyptian green Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
  • Elecrodeposition Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Electrical and Optical Properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • Electrical Properties Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Electrical resistivity Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
  • Electrochemical deposition Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
  • Electrochemical Etch Tuning Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Electrochemistry Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
  • Electrochemistry Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
  • Electro-deoxidation Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Electrodeposition Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • Electrodeposition Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
  • Electroless Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
  • Electrolyte The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
  • Electromagnetic stir casting Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
  • Electron Beam Evaporation Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Electron Microscopy Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Electrophoretic deposition Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
  • Electrospinning Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Emission Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
  • Emission Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
  • Environment Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
  • Environmental Impact Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
  • Epitaxial growth Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
  • Etching Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
  • Etching rate Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
  • Ethanol Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Ethanol Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Ethylene glycol An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
  • Experimental analysis Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]

F

  • FEM Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
  • FEM Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
  • Ferroelectric KNN Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
  • Ferroelectrics The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
  • Ferromagnetic BFO Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
  • Fe-TiC/Al2O3 composites The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
  • Fiber metal laminates Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
  • Fibers Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Filling fraction Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
  • Filling fraction Investigation on the band gap of centered square phononic crystals [(Articles in Press)]
  • Finite element method Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
  • Finite element method Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
  • Flexible and printed electronics Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
  • Flowability Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
  • Fluorapatite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
  • Fluorapatite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
  • Fluorapatite Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
  • Flutter in composites Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
  • Fly ash (FA) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
  • Foam Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
  • Forsterite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
  • Fractal dimensions Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
  • Fractal dimensions Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
  • Fractal dimensions Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
  • Fracture toughness Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Fracture toughness Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
  • Fracture toughness Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
  • Fracture toughness Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
  • Fracture toughness Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
  • Freeze casting Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • FT Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
  • FT Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Functionally graded thermal barrier coating Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
  • Functionally Graded Thermal Barrier Coating (FGTBC) Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
  • Fused Silica Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]

G

  • Gallium Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
  • Gas turbine The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
  • GDC composite Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • GdMnO3 Ceramics The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Ge Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • Gelatin Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
  • Gelatin Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
  • Gel-Casting Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • Gene Therapy A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
  • GeSe Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
  • Glass-ceramic Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
  • Glass-ceramic Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
  • Glass-ceramic Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
  • Glass-ceramic Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
  • Glass ionomer Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
  • Glass Sealant Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
  • GO optical band gap Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • GO-silane Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
  • Graphene Oxide Nanoplatelet Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
  • Graphene Oxide thin film Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • Graphite Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
  • Green synthesis Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
  • Growth Temperature Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]

H

  • H2O Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • H2PtCl6.6H2O Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Hardness Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Hardness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Hardness An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Hardness Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
  • Hardness Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
  • Hard porcelain Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Hardystonite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
  • Heat treatment Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
  • Heat treatment Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
  • Heterogeneous nucleation Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
  • Heterojunction Construction of 0D/3D ZnWO4-MoS2 heterojunction with enhanced charge carrier separation for decomposition of organic pollutants under visible light irradiation [(Articles in Press)]
  • HF Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • HfB2 Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
  • HfB2-SiC-Graphite Composite Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
  • HfB2-SiC-Nd2O3 Composite Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
  • HF/H2O2 ratio Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
  • High Energy ball milling Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Hot pressing Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • HVOF Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
  • HVOF Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
  • Hydrothermal ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
  • Hydrothermal method Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
  • Hydrothermal stability An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
  • Hydroxide Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
  • Hydroxide precursors Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
  • Hydroxyapatite Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
  • Hydroxyapatite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • Hydroxyapatite Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Hydroxyapatite Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
  • Hydroxyapatite Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
  • Hydroxyapatite The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
  • Hyperthermia An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]

I

  • Ilmenite The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
  • Ilmenite Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Immiscible Metals Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Implant Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
  • In In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Industrial policy Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
  • Injectable composite An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Injection Molding The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • Interface characteristics Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
  • Interfacial Polymerization Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
  • Intermetallics Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • In vitro Bioactivity Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Ionic Conductivity The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
  • Ionic Liquid Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Ion-implantation Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
  • IR Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
  • IR Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • IR transmittance Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • ITO thin films Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]

K

  • Kinetic Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
  • Kinetic parameters Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
  • Kinetics Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
  • KNN Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • KNN Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]

L

  • La2Ce2O7 Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
  • Lead free piezoceramics Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Li2FeSiO4 Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • Li-ion batteries Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
  • LiNO3 electrolyte Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Liquid phase sintering Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Liquid-phase sintering The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
  • Li Solid state electrolyte The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
  • Lithium Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Lithium Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
  • Lithium-ion Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • Lithium Ion Batteries Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
  • Lithium-ion battery Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
  • Lithium-ion battery Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
  • Low Voltage Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
  • LTSOFC Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Luminescence Properties Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]

M

  • Macroporous Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
  • Magnesia Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
  • Magnesium Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
  • Magnesium The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • Magnesium alloy Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
  • Magnesium titanate Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
  • Magnetic hydroxyapatite Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
  • Magnetic nanoparticle Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Magnetic nanoparticles Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
  • Magnetic nanoparticles Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
  • Magnetic properties Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
  • Magnetic properties Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • Magnetic properties The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Magnetoviscous effect Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Manganite oxides Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
  • MASHS Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Mechanical activation Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Mechanical activation Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Mechanical activation In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Mechanical milling Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Mechanical properties Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Mechanical properties An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Mechanical properties Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
  • Mechanical properties The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
  • Mechanical properties Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
  • Mechanical properties Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
  • Mechanical properties Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
  • Mechanical properties Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
  • Mechanical properties Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
  • Mechanical properties Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
  • Mechanical properties Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
  • Mechanical properties Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
  • Mechanical Property Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
  • Mechanism Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Mesoporous silica Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
  • Metal organic framework Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
  • Methylene blue Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
  • Mg In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • MgAl2O4 Spinel In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
  • MgO The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • MgTiO3 Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Micro-battery Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
  • Micrograph Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
  • Micron-sized SiC Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
  • Microstructure Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Microstructure Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Microstructure Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Microstructure Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
  • Microstructure Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
  • Microstructure Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
  • Microstructure Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]
  • Microstructure of sedimentation layer Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
  • Microwave-assisted solution combustion synthesis Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
  • Microwave dielectric Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
  • Microwave sintering Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Microwave sintering Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Milling parameters Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
  • Mixed alkali effect Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
  • Mn-Containing Glasses In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
  • Modifier Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • Molar Ratio The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
  • Molar Ratio Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Molecular Dynamics Simulation Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • MoS2 Construction of 0D/3D ZnWO4-MoS2 heterojunction with enhanced charge carrier separation for decomposition of organic pollutants under visible light irradiation [(Articles in Press)]
  • Multiferroic composites Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
  • Multiferroic Materials The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Multi-layer polymer Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]

N

  • Nafion Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Nano Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Nano Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
  • Nano Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Nano The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Nano-alloy Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Nano and micron WO3 Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Nano Biocoatings In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Nanocomposite Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Nanocomposite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • Nanocomposite Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Nanocomposite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
  • Nanocomposite Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
  • Nanocomposite Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
  • Nanocomposite Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
  • Nanocomposite Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
  • Nanocomposite Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
  • Nanocomposites Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Nanohybrid Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
  • Nano-hydroxyapatite Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
  • Nano indentation Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
  • Nano-indentation Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
  • Nanoindentation Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Nanoindentation Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Nanoparticle Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Nanoparticle Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
  • Nanoparticles Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • Nanoparticles A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
  • Nanoparticles Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
  • Nanoporous Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • Nanoporous Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
  • Nanoporous Membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
  • Nano Sintering Additives Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
  • Nano SiO2 Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
  • Nano-Size Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Nanosized Materials The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Nanosphere Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Nanostructure Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
  • Nanostructure Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
  • Nano-structured hard-metal Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Nanostructured materials In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Nanostructures Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Nanostructure silica An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
  • Nano-TiO2 The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
  • Nanotubes Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • Nanotubes lateral size Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
  • NASICON Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Nb2O5 Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
  • Ni Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Ni Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • Nickel ferrite Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Ni/GDC20 Anode Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Niobium pentoxide Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
  • Ni-P-GO Nanocomposite Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
  • Nitenpyram Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
  • NiTi Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • Numerical Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Numerical method Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]

O

  • Optical band gap Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
  • Optical band gap Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Optical band gap Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
  • Optical Density Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
  • Optical Density Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
  • Optical Glass An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
  • Optical Glass Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
  • Optical properties Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • Optical properties Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
  • Optical properties Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
  • Optical properties Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
  • Optical response Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
  • Organosol Synthesis The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
  • ORR Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Osteoinduction Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
  • Oxidation behavior Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
  • Oxidation Resistance Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
  • Oxide films Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
  • Oxide Precursor Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Oxyfluoride An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
  • Oxyfluoride Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
  • Oxy-Fluoride Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
  • Oxyfluoride glass The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
  • Oxyfluoride Glass-Ceramics Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]

P

  • PACVD Improvement of Austenitic Stainless Steel Implant via Dual Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [(Articles in Press)]
  • Palladium Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • PDLLA/PCL In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
  • PEMFC Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Perovskite Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Perovskite Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
  • Perovskite oxide Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
  • Phase Characterization Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Phase composition The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • Phase evolution Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Phase separation Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • Phase stability A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
  • Phase transformation Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Phase transformation Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Phase transformation phase stability Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Phosphate-based glass An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
  • Phosphate-based glass Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Phosphate Glass-ceramics Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • Phosphate Glass-ceramics Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
  • Phosphors Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
  • Photocatalysis Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Photocatalytic ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
  • Photocatalytic activity Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets [Volume 3, Issue 4, 2017, Pages 34-40]
  • Photocatalytic activity Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
  • Photosensitizer Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Pickering emulsion Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
  • Piezoceramic Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
  • Piezocomposite Investigation on the band gap of centered square phononic crystals [(Articles in Press)]
  • Piezoelectric Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]
  • Piezoelectric Properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
  • Plasma electrolytic oxidation Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
  • Plasma spray Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
  • Plasma spray Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • PLASMA SPRAY FORMING Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
  • Plasma spraying In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Platinum Infiltration Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • PMN-PT Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
  • Pore structure Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • Porogen Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
  • Porous Ceramics Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • Porous Network Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Potassium sodium niobate Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Powder Metallurgy Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
  • Powder Metallurgy Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
  • Powder processing Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Precipitation Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • Pressureless sintering An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Pressureless sintering The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
  • Pseudocapacitance Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
  • Pseudomorphism Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
  • Pt-Nanoparticles Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Pull out strength Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
  • Pulse Electroplating Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]

Q

  • Quantitative phase analysis Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]

R

  • Raman spectroscopy Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Raman spectroscopy Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
  • Rare earth The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Rare earth element Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
  • Rare-earth Elements An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
  • Rate capability Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
  • Reaction sequence Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Reactive Spark Plasma Sintering Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
  • Reactor TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
  • Reconstruction Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
  • Reflection properties Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
  • Reinforcement Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
  • Relative Density An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Rene-80 Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
  • Repair Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Replacement Therapy Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
  • Residual Stress Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
  • Residual Stress Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
  • Resistive switching Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • Response Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
  • Response Surface Methodology Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
  • Reverse co Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • Reverse Osmosis Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
  • Rheological chracteristics The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • Rheological properties An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Rheological property Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Rheology Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
  • Rice husk Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
  • Rubber Compound Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]

S

  • Safavid Era Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
  • Samarium Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Saturation magnetization Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
  • SBF An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
  • Scaffold Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
  • Scaffolds Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
  • Scan Rate Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Scientometric Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
  • Scientometrics The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
  • Scratch Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
  • Se Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • Segregation The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Self-compacting mortar (SCM) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
  • SEM Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
  • SEM The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
  • Semiconductor Glass Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
  • Si In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Si3N4 Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • SIC Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • SIC Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
  • SiC powder The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • SiC-TiC The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
  • SILAR process Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Silica Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • Silica Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Silica Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
  • Silica-alumina membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
  • Silicon carbide Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
  • Silicon nanowires Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
  • Silicon Pyramid Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • SILVACO Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
  • Simulated body fluid In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Simulated body fluide solution Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
  • Simulation Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
  • Simulation Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
  • Sintering Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Sintering Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
  • Sintering The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Sintering Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
  • Sintering The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
  • Sintering process Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • SiO2 ceramic Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
  • Small polaron hopping Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
  • Sn Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
  • Sodium Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
  • SOFC Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
  • SOFC The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
  • Solar Cell Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Solar Cell Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Sol-Gel Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • Sol-Gel An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
  • Sol-Gel Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Sol-Gel In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
  • Sol-gel method Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • Solidification Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
  • Solid oxide fuel cells Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
  • Solid state Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
  • Solid state Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
  • Solid-State Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]
  • Solid State Reaction The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Solvent Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
  • Spark Plasma Sintering In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
  • Spark Plasma Sintering Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
  • Spark Plasma Sintering Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Spark Plasma Sintering Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Spark Plasma Sintering Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
  • Spark Plasma Sintering Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
  • Spark Plasma Sintering The Role of Diamond on Wear Properties of WC-Co Composite [(Articles in Press)]
  • Spark plasma sintering (SPS) Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Spark plasma sintering (SPS) Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
  • Spherical powders Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Spinels Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
  • Spin glass Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
  • SPS Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
  • Sputtering Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
  • Sputtering Improvement of Austenitic Stainless Steel Implant via Dual Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [(Articles in Press)]
  • SS316L implant Improvement of Austenitic Stainless Steel Implant via Dual Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [(Articles in Press)]
  • Stability Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Starch Consolidation Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • Steel Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
  • Stöber method Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Stress and Strain Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
  • Structural properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • Superalloy Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
  • Superparamagnetic Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
  • Surface analysis ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
  • Surface modification An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
  • Surface Texturing Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Surfactants Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
  • Synthesis Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
  • Synthesis The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
  • Synthesize Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]

T

  • Taguchi method Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Taguchi method Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
  • Tantalum carbide Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Tape casting Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Tape casting The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
  • Targeted nucleic acid delivery A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
  • Tellurite glass Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
  • TEM Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • TEM Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Textural Properties Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • The CAZO Thin Films Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
  • Thermal annealing Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
  • Thermal barrier coating The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
  • Thermal barrier coatings (TBCs) A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
  • Thermal expansionc oefficient Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
  • Thermal shock Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
  • Thermal stability Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
  • Thin film Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Thin film Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
  • Thixotropy Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Ti Alloy Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
  • TiB2 Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • TiC Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Ti containing hydroxyapatite Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
  • Ti-Cu alloy Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
  • Tiles Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
  • Tin Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • TiO2 Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
  • TiO2 The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • TiO2 Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
  • TiO2 Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
  • TiO2 The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
  • TiO2 Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
  • TiO2 nanoparticles Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • TiO2 nanoparticles Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • TiO2 nanosphere Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Tissue engineering Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
  • Tissue Regeneration Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
  • Titanium Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
  • Titanium diboride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Titanium dioxide Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Titanium nanotube Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
  • Titanium substrates Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
  • Topography Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
  • Topography Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
  • Toughness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Toughness mechanisms The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
  • Tragacanth An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Tragacanth Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
  • Transparent Ceramic In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
  • Two Steps The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]

U

  • Ultra-High Temperature Ceramic (UHTC) Oxidation Behavior Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
  • Ultra-low cement The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
  • Ultrasound Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Ultraviolet detector Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
  • Urbach tailing The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
  • UV visible Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]

V

  • Viscosity Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
  • Vitro Biocompatibility In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • VOSviewer Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]

W

  • Waste ceramic powder (WCP) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
  • Waste Management Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • WC The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • WC Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • WC-Co Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
  • WC–Co Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • WC–FeCrAl Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
  • WC–NiMoCrFeCo Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
  • Wear Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Wear Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • Wear Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
  • Wear rate The Role of Diamond on Wear Properties of WC-Co Composite [(Articles in Press)]
  • Wet-chemical method A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
  • WO3 Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
  • WO3.H2O Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
  • WO3 nanoparticles Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
  • WO3-rGO Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Wollastonite In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]

X

  • X Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
  • X-ray diffraction Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
  • XRD Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]

Y

  • Y Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
  • Y2O3 dopant The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
  • Y3Al5O12 - MgAl2O4 Spinel Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
  • YAG: Cr Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
  • YSZ Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • YSZ suspension Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
  • YSZ : ZrO2-8 wt. % Y2O3 A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
  • Yttria stabilized zirconia (YSZ) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • Yttrium aluminum garnet Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]

Z

  • Ziconia Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Zircon The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • Zirconia Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
  • Zirconia nanoparticles Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Zirconium Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • Zirconium Oxide Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
  • Zn content ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
  • ZnO Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • ZnO Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
  • ZnO thin films Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
  • ZnS Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
  • ZnWO4 Construction of 0D/3D ZnWO4-MoS2 heterojunction with enhanced charge carrier separation for decomposition of organic pollutants under visible light irradiation [(Articles in Press)]
  • ZrB2-30 vol% SiC Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
  • ZrB2-SiC Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
  • ZrB2-SiC composites Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • ZrO2 The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
  • Z-X topography Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]