A
-
Abbasian, Ahmad Reza
The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
-
Abdollahi, Elaheh
Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
-
Ahmadi, K.
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
-
Amani, Nima
Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
-
Askari Zamani, M. A.
Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
-
Azizieh, M.
Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
B
-
Badiei, A.
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
-
Bakhsheshi-Rad, Hamidreza
Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
-
Balak, Z.
Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
-
Balak, Zohre
Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
-
Barfi Sistani, Pooneh
Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
-
Bazargan-Lari, Reza.
Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
C
-
Choi, Gyeong Man
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
E
-
Ebadzadeh, Touraj
Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
F
-
Faeghinia, A.
An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
-
Farhadi, Khalil
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
-
Farvizi, Mohammad
Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
G
-
Ghofrani, Samaneh
Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
H
-
Hadavi, Mohammad Mehdi
An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
-
Hayati, R.
Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
-
Hesaraki, Saeed
An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
-
Hosseinifard, M.
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
J
-
Jalilpour, Marzieh
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
K
-
Kaveh, Reza
An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
-
Kazazi, Mahdi
Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
-
Khoshhal, Razieh
Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
-
Kiani-Rashid, Alireza
Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
-
Kianpour Rad, Mansoor
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
M
-
Maghsoudipour, Amir
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
-
Majidian, Hudsa
Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
-
Massoudi, A.
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Massoudi, Abouzar
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
-
Mobasherpour, Iman
An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
-
Mollazadeh Beidokhti, Sahar
Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
N
-
Naderi, Mosleh
Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
-
Nangir, M.
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Nezafati, Nader
An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
-
Nikzad, Leila
Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
-
Noferesty, E.
Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
O
-
Omidvar-Askary, Najmeh
The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
P
-
Parvizi, Pourya
Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
R
-
Rahimipour, Mohammad reza
Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
-
Rasti, Mahtab
An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
-
Rezaei, Ali Reza
An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
-
Rezvani, Mohammad
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
S
-
Salahi, E.
An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
-
Shirvani, Kourosh
Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
-
Shojaie-Bahaabad, Maryam
An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
-
Shokrvash, Hussein
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
T
-
Tayebifard, S. A.
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Torknik, Fatemeh Sadat
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Y
-
Yazdani Rad, Rahim
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Your query does not match with any item