Keyword Index

A

  • Absorber Layer Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • AC electric field Affectability of ceramic nanoparticles of different compound from surface characteristics in AC electrophoretic deposition [Volume 1, Issue 1, 2015, Pages 32-35]
  • Acetone An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 43-49]
  • Adsorption and self Molecular dynamics studies of straight-chain alkanes diffusion in SiO2 ceramic versus Bosanquet formula [Volume 1, Issue 1, 2015, Pages 17-26]
  • Air Plasma Spray Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Air plasma spraying (APS) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • Al The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Al-ion batteries Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
  • Alkanes Molecular dynamics studies of straight-chain alkanes diffusion in SiO2 ceramic versus Bosanquet formula [Volume 1, Issue 1, 2015, Pages 17-26]
  • Alumina matrix Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Alumina refractory castable The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3&4, 2018, Pages 16-22]
  • Alumina-zirconia composites Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3&4, 2018, Pages 36-42]
  • Alumina-Zirconia-Mullite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • Aluminide Coating Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3&4, 2018, Pages 1-7]
  • Aluminum Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Aluminum Alloy The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Aluminum and Graphite The Effect of Raw Material Ratios on the Fe-TiC/Al2O3 Composite Formation Mechanism [Volume 3, Issue 2, 2017, Pages 25-30]
  • Aluminum Isopropoxide Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • Aluminum nitride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Ammonia Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanospheres via Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Amorphous aluminosilicate phase Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3&4, 2018, Pages 36-42]
  • AMZ composites The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • Anodized Titanium Dioxide Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • Antireflection Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Apatite-wollastonite An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Aqueous electrolyte Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]

B

  • Ball milling Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Ball milling An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
  • Band gap Evaluating electrical properties, band gaps and rate capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) cathode materials using density of states diagrams [(Articles in Press)]
  • Barium titanate The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
  • Battery Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • BET Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Bioactive Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • Bioactive Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
  • Bioactive An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Bioactive Glass Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Biomedical applications In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Bismuth borate glasses Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
  • Bismuth ferrite Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • BK7 glass Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • BMIm[OH] Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Bond strength Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Bone cements Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
  • Bone tissue engineering Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Bone tissue engineering scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3&4, 2018, Pages 8-15]
  • Borosilicate glasses Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]

C

  • CaF2nanocrystals Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
  • Calcination kinetics Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Calcium phosphate glass Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • Calcium titanate Determining the optimal conditions for calcium titanate nanoparticles synthesized via mechanical alloying method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Carbon nanotubes Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Catalyst Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Catalyst Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
  • Cathode Materials Evaluating electrical properties, band gaps and rate capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) cathode materials using density of states diagrams [(Articles in Press)]
  • Cathodic electrodeposition Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
  • CDS Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • CdTe Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Cemented carbide Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Cementitious matrix composite Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
  • Centrifuge casting The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • CeO2 Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • Ceramic Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • Ceramic core Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
  • Ceramic materials Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • Ceramic/ metals composite Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Chalcogenide glass Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • Characterization Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
  • Chemical etching Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Chemical Vapor Deposition Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
  • CNT Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • CO Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Combustion Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • Composite Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Composite The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Composite Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Composite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • Composite Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Compressibility Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
  • Concentration ratios Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
  • Construction and demolition waste Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • Copper hexacyanoferrate Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
  • Cordierite Effect of milling time and microwave sintering on microhardness and electrical properties of nano and micro structured cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Cordierite Glass Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
  • Corrosion Resistance The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • CPC Effects of time, temperature and precursor on solid state synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
  • Cr Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
  • Cristobalite Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
  • Crystallization Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • CTAB Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • Cubical crystal structure Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • CuInAlSe2 Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Current Density Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
  • Cyclic oxidation Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3&4, 2018, Pages 1-7]
  • Cyclic Voltammetry Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]

D

  • Degradability, Swelling An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Densification Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Densification Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Densification Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Density of states Evaluating electrical properties, band gaps and rate capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) cathode materials using density of states diagrams [(Articles in Press)]
  • Depth profile Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
  • Design for Disassembly (DfD) technique Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • DFT Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • Dielectric Constant Effect of milling time and microwave sintering on microhardness and electrical properties of nano and micro structured cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Dielectric properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
  • Diffusion Molecular dynamics studies of straight-chain alkanes diffusion in SiO2 ceramic versus Bosanquet formula [Volume 1, Issue 1, 2015, Pages 17-26]
  • Dimethylformamide An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 43-49]
  • Dispersant The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3&4, 2018, Pages 16-22]
  • Doping Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
  • Doping The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • DSC analysis Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]

E

  • ECV Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
  • Elecrodeposition Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Electrical and Optical Properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • Electrical Properties Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Electrical resistivity Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
  • Electrochemical deposition Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
  • Electrochemical Etch Tuning Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Electrochemistry Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
  • Electro-deoxidation Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Electrodeposition Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • Electron Beam Evaporation Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Electron Microscopy Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Electrospinning Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Etching rate Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
  • Ethanol Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Ethanol Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Ethylene glycol An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
  • Experimental analysis Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]

F

  • FEM Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
  • Ferroelectrics The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
  • Fe-TiC/Al2O3 composites The Effect of Raw Material Ratios on the Fe-TiC/Al2O3 Composite Formation Mechanism [Volume 3, Issue 2, 2017, Pages 25-30]
  • Fibers Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Finite element method Simulation of the effect of sub- micron interface roughness on the stress distribution in functionally graded thermal barrier coatings (FG- TBC) [Volume 1, Issue 1, 2015, Pages 40-47]
  • Fluorapatite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3&4, 2018, Pages 8-15]
  • Foam Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
  • Fracture toughness Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Fracture toughness Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
  • Freeze casting Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • FT Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
  • FT Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Functionally graded thermal barrier coating Simulation of the effect of sub- micron interface roughness on the stress distribution in functionally graded thermal barrier coatings (FG- TBC) [Volume 1, Issue 1, 2015, Pages 40-47]

G

  • GDC composite Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • GdMnO3 Ceramics The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Ge Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • Gelatin Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
  • Gel-Casting Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • GeSe Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
  • Glass-ceramic Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
  • Glass-ceramic An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • Glass-ceramic Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
  • GO optical band gap Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
  • Graphene Oxide thin film Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]

H

  • H2O Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • H2PtCl6.6H2O Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Hardness Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Hardness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Hardness Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
  • Hard porcelain Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Hardystonite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3&4, 2018, Pages 8-15]
  • Heat treatment Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
  • HF Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • HF/H2O2 ratio Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
  • High Energy ball milling Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Hot pressing Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Hydrothermal stability An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 23-35]
  • Hydroxide Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
  • Hydroxyapatite Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
  • Hydroxyapatite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • Hydroxyapatite Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]

I

  • Ilmenite The Effect of Raw Material Ratios on the Fe-TiC/Al2O3 Composite Formation Mechanism [Volume 3, Issue 2, 2017, Pages 25-30]
  • Ilmenite Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Immiscible Metals Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • In In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Injectable composite An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Injection Molding The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • Interface characteristics Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
  • Intermetallics Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Interphase An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
  • In vitro Bioactivity Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Ionic Liquid Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • IR Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
  • IR Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • IR transmittance Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • ITO thin films Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]

K

  • Kinetics Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
  • KNN Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]

L

  • Lead free piezoceramics Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Li2FeSiO4 Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • LiNO3 electrolyte Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Liquid phase sintering Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Lithium Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Lithium-ion Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
  • Lithium Ion Batteries Evaluating electrical properties, band gaps and rate capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) cathode materials using density of states diagrams [(Articles in Press)]
  • Lithium-ion battery Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
  • LTSOFC Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Luminescence Properties Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]

M

  • Magnesia Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3&4, 2018, Pages 36-42]
  • Magnesium The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • Magnesium titanate Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
  • Magnetic nanoparticle Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Magnetic properties Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
  • Magnetic properties Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • Magnetic properties The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Magnetoviscous effect Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • MASHS Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Mechanical activation Effect of milling time and microwave sintering on microhardness and electrical properties of nano and micro structured cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Mechanical activation Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Mechanical activation In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Mechanical milling Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Mechanical properties Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Mechanism Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Mesoporous silica Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
  • Methylene blue Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
  • Mg In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • MgAl2O4 Spinel In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
  • MgO The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • MgTiO3 Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Microstructure Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Microstructure Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Microstructure Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Microwave-assisted combustion synthesis Microwave-assisted combustion synthesis of WO3 nanoparticles: optical and colorimetric characteristics [(Articles in Press)]
  • Microwave dielectric Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
  • Microwave sintering Effect of milling time and microwave sintering on microhardness and electrical properties of nano and micro structured cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
  • Microwave sintering Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Mixed alkali effect Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
  • Molar Ratio The Effect of Raw Material Ratios on the Fe-TiC/Al2O3 Composite Formation Mechanism [Volume 3, Issue 2, 2017, Pages 25-30]
  • Molar Ratio Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Molecular Dynamics Simulation Molecular dynamics studies of straight-chain alkanes diffusion in SiO2 ceramic versus Bosanquet formula [Volume 1, Issue 1, 2015, Pages 17-26]
  • Multiferroic Materials The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]

N

  • Nafion Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Nano Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
  • Nano Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
  • Nano Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Nano The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Nano-alloy Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Nano and micron WO3 Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Nano Biocoatings In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Nanocomposite Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Nanocomposite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • Nanocomposite Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Nanocomposites Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
  • Nanoindentation Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Nanoindentation Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Nanoparticle Determining the optimal conditions for calcium titanate nanoparticles synthesized via mechanical alloying method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Nanoparticles Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • Nanoporous Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • Nanoporous Membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 23-35]
  • Nano Sintering Additives Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
  • Nano-Size Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Nanosized Materials The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Nanosphere Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanospheres via Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Nanostructure Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
  • Nano-structured hard-metal Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Nanostructured materials In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Nanostructures Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Nanostructure silica An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 23-35]
  • Nano-TiO2 The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3&4, 2018, Pages 16-22]
  • Nanotubes Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • NASICON Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Nb2O5 Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
  • Ni Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Ni Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • Nickel ferrite Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • Ni/GDC20 Anode Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • NiTi Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • Numerical Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
  • Numerical method Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]

O

  • Optical band gap Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
  • Optical band gap Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Optical properties Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • Optical properties Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
  • Optical properties Microwave-assisted combustion synthesis of WO3 nanoparticles: optical and colorimetric characteristics [(Articles in Press)]
  • Organosol Synthesis The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
  • ORR Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Oxidation Resistance Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
  • Oxide Precursor Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]

P

  • Palladium Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • PEMFC Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
  • Perovskite Determining the optimal conditions for calcium titanate nanoparticles synthesized via mechanical alloying method [Volume 1, Issue 1, 2015, Pages 11-16]
  • Perovskite oxide Thermal expansion coefficient of Ln0.6Sr0.4Co0.2M0.8O3−δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) perovskite oxide [Volume 1, Issue 1, 2015, Pages 27-31]
  • Phase Characterization Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Phase composition The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • Phase evolution Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Phase separation Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • Phase transformation Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Phase transformation Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Phase transformation phase stability Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Phosphate-based glass An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 43-49]
  • Phosphate-based glass Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Phosphate Glass-ceramics Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
  • Phosphors Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
  • Photocatalysis Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Photocatalytic activity Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets [Volume 3, Issue 4, 2017, Pages 34-40]
  • Photosensitizer Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Piezoelectric Properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
  • Plasma spray Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
  • Plasma spray Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • Plasma spraying In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Platinum Infiltration Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Pore structure Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
  • Porous Ceramics Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • Porous Network Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanospheres via Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Potassium sodium niobate Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • Powder processing Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
  • Precipitation Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • Pseudomorphism Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
  • Pt-Nanoparticles Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
  • Pull out strength Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]

Q

  • Quantitative phase analysis Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]

R

  • Raman spectroscopy Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Rare earth The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Rate capability Evaluating electrical properties, band gaps and rate capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) cathode materials using density of states diagrams [(Articles in Press)]
  • Reaction sequence Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
  • Reflection properties Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
  • Rene-80 Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3&4, 2018, Pages 1-7]
  • Repair Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Residual Stress Simulation of the effect of sub- micron interface roughness on the stress distribution in functionally graded thermal barrier coatings (FG- TBC) [Volume 1, Issue 1, 2015, Pages 40-47]
  • Resistive switching Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • Reverse co Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
  • Rheological chracteristics The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • Rheological properties An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Rheological property Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]

S

  • Samarium Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • SBF An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 43-49]
  • Scaffold Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
  • Scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3&4, 2018, Pages 8-15]
  • Scan Rate Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Se Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
  • Segregation The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Si In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Si3N4 Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • SIC Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • SiC powder The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • SILAR process Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Silica Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
  • Silica Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanospheres via Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Silica-alumina membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 23-35]
  • Silicon nanowires Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
  • Silicon Pyramid Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Simulated body fluid In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
  • Simulation Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
  • Sintering Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Sintering Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
  • Sintering The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • Sintering process Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
  • SiO2 ceramic Molecular dynamics studies of straight-chain alkanes diffusion in SiO2 ceramic versus Bosanquet formula [Volume 1, Issue 1, 2015, Pages 17-26]
  • SOFC Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
  • Solar Cell Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Solar Cell Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Sol-Gel Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • Sol-Gel An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3&4, 2018, Pages 43-49]
  • Sol-Gel Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
  • Sol-gel method Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • Solid state Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
  • Solid State Reaction The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
  • Solvent Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for Decoration of Ceramic Tiles [(Articles in Press)]
  • Spark Plasma Sintering In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
  • Spark Plasma Sintering Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
  • Spark Plasma Sintering Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Spark Plasma Sintering Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Spark plasma sintering (SPS) Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
  • Spherical powders Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Stability Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Starch Consolidation Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
  • Steel Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
  • Stöber method Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanospheres via Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • Structural properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • Surface Texturing Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
  • Synthesis Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]

T

  • Taguchi method Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Tantalum carbide Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Tape casting Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • TCP Effects of time, temperature and precursor on solid state synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
  • Tellurite glass Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
  • TEM Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • TEM Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Textural Properties Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
  • Thermal expansionc oefficient Thermal expansion coefficient of Ln0.6Sr0.4Co0.2M0.8O3−δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) perovskite oxide [Volume 1, Issue 1, 2015, Pages 27-31]
  • Thin film Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Thixotropy Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
  • TiB2 Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • TiC Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Ti containing hydroxyapatite Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
  • Tin Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
  • TiO2 Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
  • TiO2 The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
  • TiO2 Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
  • TiO2 nanoparticles Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
  • TiO2 nanosphere Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Titanium diboride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
  • Titanium dioxide Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Titanium substrates Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
  • Toughness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Tragacanth An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
  • Transparent Ceramic In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]

U

  • Ultra-low cement The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3&4, 2018, Pages 16-22]
  • Ultrasound Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanospheres via Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
  • UV visible Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]

V

  • Vitro Biocompatibility In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]

W

  • Waste Management Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
  • WC The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • WC Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • WC–Co Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Wear Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
  • Wear Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • WO3 Microwave-assisted combustion synthesis of WO3 nanoparticles: optical and colorimetric characteristics [(Articles in Press)]
  • WO3.H2O Microwave-assisted combustion synthesis of WO3 nanoparticles: optical and colorimetric characteristics [(Articles in Press)]
  • WO3-rGO Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
  • Wollastonite In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]

X

  • X Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
  • XRD Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]

Y

  • Y Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
  • YSZ Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Yttria stabilized zirconia (YSZ) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
  • Yttrium aluminum garnet Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]

Z

  • Ziconia Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
  • Zircon The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
  • Zirconia nanoparticles Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
  • Zirconium Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
  • ZnO Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • ZnS Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
  • ZrB2-SiC Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
  • ZrB2-SiC composites Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]