Reviewers

Review Process Guidelines

 

What points should be considered when assessing the article quality?

1. Is the submitted manuscript clear, correct and within the journal’s scope?

  • Are the problems and purposes of the work clearly stated?
  • Is the subject of the work within the journal’s scope?
  • Is it correct and free of obvious errors?
  • Are the mathematics and methodology of the work rigorous?

2. Is the work original and interesting for the readers?

  • Is the submitted manuscript original? Does it contain new results that advance the prior research results in its scientific field?
  • Has any part of the article already been published elsewhere? Does it constitute plagiarism?
  • Is the article scientifically sound and not misleading?
  • Is the presentation complete for a scientific article? Is there any critical information missing?

3. Is the presentation of ideas satisfactory?

  • Does the title of the article reflect the content of the article?
  • Is the abstract well-written to describe the essential information?
  • Is the introduction section well-written and satisfactory?
  • Is the length of the article appropriate depending on its type?
  • Is the conclusion section logically entailed by the results?
  • Is the article written in concise and eloquent English?

 

Tips for writing a review report

Reviewers should consider the following points when writing their review report:

1. There are two sections to write your review, one for the reviewer’s comments to the chief editor and another for the reviewer’s comments to the authors. Your comments to the chief-editor will be read only by the editorial office and will not be revealed to the authors.

2. Provide an overall recommendation for or against the publication of the manuscript to the chief-editor.

3. If you believe that the manuscript requires revision, you are requested to provide constructive comments and suggestions for improving the quality and presentation of the article.

4. When you provide suggestions on revisions, make it clear if they are mandatory or optional.

5. For timely and rapid review, point out all the faults of the article only once. Do not add new criticisms after the authors have submitted the revised version. This will delay the review process and make it endless.

 

Reviews List

 

Reviewer Name Specialty Affiliation
Ahmad Reza Abbasian Oxides Materials Engineering department, University of Sistan and Baluchestan
Hamid Abdoli Composites Department of Renewable Energy, Niroo Research Institute, P.O. Box: 1468613113, Tehran, Iran
Hassan Ahmadi Moghaddam Others Inorganic Pigments and Glaze, Institute for Color Science and Technology,Ministry of Science, Research and Technology, Tehran Iran
Amir Masoud Arabi Traditonal: {Insulating Materials, Glasses & Glass-ceramics, Enamels, Structural Clay Products (Tiles, Bricks, Sanitaryware), Inorganic Cementitious Materials (Cement, Plaster, or Lime) , Refractories, Abrasives, or Whitewares (Porcelain)} Department of Inorganic Pigments and GlazesInstitute for Color Science and Technology (ICST)TehranIran
Javad Arasteh Properties (Physical, Mechanical, Optical, Electrical, Thermal, Chemical, Structural, Acoustical, Environmental, Radiological, Magnetic, Atomic, Thermodynamic, and Manufacturing) Department of Materials and Metallurgy Engineering - Shahid Dadbin Technical College of Kerman - Kerman - Iran
Saeid Baghshahi Composites Faculty of Engineering and Technology, Imam Khomeini International University (IKIU)
Hajieh Bastami Oxides Technical and Vocational University of Tehran, Faculty of Material Science and Engineering, Shariaty College, 18918-16851, Tehran, Iran
Aliasghar Behnamghader Advanced Structural: {Electro, Bio, Nuclear, Tribological, TBC or Automative} ceramics Biomedical Engineering, Material and Energy Research Center(MERC)
Leila Davarpanah Nanomaterials and Nanostructures Materials and Energy Research Center (MERC), College of environment
Mehdi Delshad Chermahini Composites Faculty of Engineering, Shahrekord University, Shahrekord, Iran
Touraj Ebadzadeh Composites Research Department of Ceramic, Materials and Energy Research Center (MERC), Meshkin Dasht, Alborz, Iran
mohammad Elahi Oxides Faculty of Science, Islamic Azad University, Science and Research
Mohammad Hossein Enayati Composites, Nanomaterials and Nanostructures Department of Materials Engineering, Isfahan University of Technology (IUT), Isfahan, 84154-83111, Iran
Mohammad Farvizi Ceramics Matrix Composite (CMC), Composites Research Department of Ceramic, MERC, Alborz, Iran
Mahdi Feizpour Composites Department of Materials Science and Engineering, Meybod University, Yazd, Iran
Monireh Ganjali Biomaterials Nanotechnology and Advanced Materials Department, Material and Energy Research Center (MERC), Alborz, Iran
Ebrahim Ghasemi Oxides Inorganic pigment and glazes, Institute for color science and technology
Mojtaba Ghatee Oxides Department of Materials Science and Engineering, Shahrood University of Technology, Shahrood, Iran
Raziye Hayati Electro-ceramics Department of Materials Science and Engineering, Faculty of Engineering, Yasouj University, Yasouj, Iran
Mojtaba Hosseinifard Nanomaterials and Nanostructures Department of Semiconductors, Materials and Energy Research Center, Karaj, Iran
Mozhgan Hosseinnezhad Advanced Structural: {Electro, Bio, Nuclear, Tribological, TBC or Automative} ceramics Center of Excellence for Color Science and Technology and Department of Organic Colorants, Institute for Color Science and Technology, P.O. Box 16765-654, Tehran, Iran
Mahdi Kalantar Composites Industrial Metallurgy Group- Mining and Metallurgy Engineering Department- Yazd University
Mohammad Mahdi Kalantarian Composites Ceramic, Material and Energy Research Center
zahra khakpour Advanced Structural: {Electro, Bio, Nuclear, Tribological, TBC or Automative} ceramics, Electro-ceramics ceramic, Material and Energy Research Center
Sara Khamseh Coatings Department of Nano Materials and Nano Coatings, Institute for Color Science and Technology(ICST), Tehran, Iran
Sun Jae Kim Semiconductors Samsung Electronics, South Korea
Niyaz Mohammad Mahmoodi Nanomaterials and Nanostructures Department of Environmental Research, Institute for Color Science and Technology, Tehran, Iran
Hudsa Majidian Oxides, Rheology, Suspensions, Suspension stability, Dispersion, Slips Ceramic department, Materials and Energy Research Center, Meshkindasht, Alborz, Iran
Mohammad Maleki Shahraki Electro-ceramics Department of Materials Engineering, Faculty of Engineering, University of Maragheh, Maragheh, 55181-83111, Iran
Sahebali Manafi Ceramics Matrix Composite (CMC) Department of Materials Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran
Rouhollah Mehdinavaz Aghdam ='[1]ACERP USERS'!K180&","&'[1]ACERP USERS'!L180
Iman Mobasherpour Composites Department of Ceramic, Materials and Energy Research Center, Meshkindasht, Alborz, Iran
Amirhossein Moghanian Materials Engineering, Faculty of Technical & Engineering, Imam Khomeini International University, Qazvin, Iran
Hamed Mohebbi Electro-ceramics Niroo Research Institute Iran University of Science and Tecnology
Nader Nezafati Bio-ceramics Research Department of Nanotechnology and Advanced Metalls, Materials and Energy Research Center (MERC), Meshkin Dasht, Alborz, Iran
Amir Abbas Nourbakhsh Composites Metallurgy and materials engineering department, Islamic Azad University of Shahreza
Amir Hossein Pakseresht Thermal spray coating: {Plasma, Detonation , Electric Arc Wire (EAW) , Oxy Fuel Wire (OFW), High Velocity Oxygen Fuel (HVOF) , Low Velocity Oxygen Fuel (LVOF), Powder Flame , Plasma Arc Powder (PAP) , Warm , Cold , High Velocity Air Fuel (HVAF)} Spraying Department of Coatings, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia
Mohammad Pazouki Nanomaterials and Nanostructures Research Department of Energy, Materials and Energy Research Center (MERC), Meshkindasht, Alborz, Iran
Biaolin Peng Semiconductors Research Center for Optoelectronic Materials and Devices, School of Physical Science and Technology, Guangxi University, Nanning 530004, China
Ali Ramazani Nanomaterials and Nanostructures University of Zanjan
Tayebeh Ramezani Biomaterials Materials and Energy Research Center
Habibollah Rasteghari Kopaei Composites Department of Mechanical and Materials Engineering, Birjand University of Technology, South Khorasan, 97198-66981, Iran
Mansour Razavi Composites, Non-Oxides Research Department of Ceramic, Materials and Energy Research Center (MERC), Meshkin Dasht, Alborz, Iran
Mohammad Rezvani Glasses & Glass-ceramics Department of Materials Science and Ceramics, University of Tabriz, Tabriz, Iran
Hamed Sabet Composites, Others Department of Metallurgy and Materials Engineering Karaj Branch, Islamic Azad University Karaj, Alborz, Iran
Hassan Saghafian Larijani Composites School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran, 16846-13114, Iran
Erfan Salahinejad Composites Department of materials science and engineering, Khajeh nasir tusi, Tehran, Iran
Masoud Salavati-Niasar Nanomaterials and Nanostructures Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P.O. Box 87317-51167, I.R. Iran
Samira Salehi Nanomaterials and Nanostructures Department of Energy, Niroo Research Institute (NRI), Tehran, Iran
Esmaeil Salimi Biomaterials Department of materials science and engineering, Shahrood University of Technology, Shahrood, Iran
Fatemehsadat Sayyedan Coatings, Others Department of Materials Engineering Isfahan University of Technology, Isfahan 8415683111, Iran
Ali Sedaghat Ahangari Hossein Zadeh Composites Materials and Energy Research Centre, P.O. Box 31787-316, Karaj, Iran
Azizollah Shafiekhani Advanced Structural: {Electro, Bio, Nuclear, Tribological, TBC or Automative} ceramics Department of Physics, Alzahra University, Tehran 1993891167, Iran.
Reza Shidpour Bio-ceramics Materials Engineering Department, Babol Noshirvani University of Technology, P.O. Box: 484, Zip code: 47148-71168, Babol, Iran
Maryam Shojaie Ceramics Matrix Composite (CMC) Faculty of Chemical Engineering and material, Shahrood University of Technology, shahrood, iran
Hussein Shokrvash 3D (Bulk, Coils, Cones, Spikes, Flowers, Balls, Pillars, Nanocrystalline or Nanoporous Materials) Department of Materials Engineering, Faculty of Engineering, University of Maragheh, PO Box 55181-83111, Maragheh, Iran
Wenhong Sun Semiconductors Research Center for Optoelectronic Materials and Devices, School of Physical Science and Technology, Guangxi University, Nanning 530004, China & Guangxi Key Laboratory of Processing for Non-ferrous Metal and Featured Materials,
Ștefan Țălu Coatings, Oxides The Directorate of Research, Development and Innovation Management (DMCDI), Constantin Daicoviciu Street, no. 15, Cluj-Napoca, 400020, Cluj county, Romania
seyed ali Tayebifard Non-Oxides Semiconductors Department, Materials and Energy Research Center, Meshkin Dasht, Alborz, Iran
Fatemeh Sadat Torknik Composites Materials and Energy Research Center (MERC), Karaj, Alborz, Iran
Omid Yaghobizadeh Ceramics Matrix Composite (CMC), Composites, Metal Matrix Composite (MMC) Department of Materials Science and Engineering, Faculty of Technology and Engineering, Imam Khomeini International University, Qazvin 3414896818, Iran
Mohammad Zakeri Ceramics Matrix Composite (CMC) Ceramics Department, Materials and Energy Research Center, Meshkindasht, Alborz, Iran