Afshari, Faezeh A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Ahmadi, Sara Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
Ahmadimoghadam, Hajar Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Akbarpour, Mohammad Reza Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Akbarpour, Mohammad Reza Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
Alidoosti Shahraki, Fatemeh Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Alizadeh, Ali Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Almasi Kashi, Mohammad Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Amanat, Bentolhoda Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Asadian, Keivan Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Ashofteh, Afshin Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
B
Baghaban Eslaminejad, Mohamadreza In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
E
Eftekhari Yekta, Bijan In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Eisaei, Mahin Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
Eshraghi, Mohamad Javad Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
F
Farhadian, Mousa Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
Fazeli, Mohammadreza Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Forghani, Wrya Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
G
Ghanbari, Hossein Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Ghasemi, Ali Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
GolshanBafghi, Zohreh A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Gordani, Gholamreza Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
H
Hasheminia, Susan The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Heydaryan, Kamran Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Houshyar Eftekhari, Seyed Davoud Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
J
Javadpour, Jafar In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
K
Kalantarian, Mohammad Mahdi Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Kameli, Mohammad Javad Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Kaveh, Mohammad Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Kazerani Vahdani, Mohammad Reza Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Khakpour, Zahra The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Kolahgar Azari, Kaveh Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Maleki, Zahra Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Manavizadeh, Negin A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Maraki, Mohammad Reza Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Mardani Ghahfarrokhi, Peyman Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Mir Mohammadi, Ramin A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Mohassel, Abbas Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Moniri Javadhesari, Solmaz Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Mosavi Mashhadi, Mahmoud Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
N
Namiranian, Afshin Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Nasehi Gogajeh, Narges In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Nikzad, Leila The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Noori, Aziz Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
Norouzi Palangani, Fatemeh Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
O
Omidvar, Hamid Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Ostad Shabani, Mohsen Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
P
Pirmohammadi, Parinaz The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Rahimipour, Mohammad Reza Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Rajabi, Masoud Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Razavi, Mansour The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Rezazadeh, Leila The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
S
Safari, Mojtaba Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Sahragard, Rasool Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Sajjadnejad, Mohammad Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Samiee, Mohsen The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Sayadi Kelemi, Amir Hossein Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Sedehi, Syyed Mohammadreza Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Seifollahpour, Sana Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Setoudeh, Nader Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Seyedraoufi, Zahra Sadat The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Shahdadi, Amir Hossein Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Shahsavari, Hasan Reza Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Shajari, Yazdan The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Shanaghi, Ali Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Souri, Ali Reza Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
T
Taheri Goodarzi, Hojjat Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Tavoosi, Majid Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Y
Yousefi Mashhour, Hatef Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Z
Zakeri, Mohammad The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Zamani, Khashayar Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Zeinali, Ali Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
