Abdi Maghsoudlou, Mohammad Sadegh Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Afsharian, Sepehr The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Afzali, Amir Hossein Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Aghababaei, Hamed Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Aghababaeian, Shiva Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Aghaei, Alireza Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Akbari Gandomani, Mahdieh The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Akbari Gandomani, Mahdieh Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Akbarpour, Mohammad Reza Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Alamdari, Sanaz Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Alamdari, Sanaz Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Alamdari, Sanaz Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Alhaji, Amir Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Alipoor, Mohammadreza Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
Alizadeh, Ali Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Aminy, Mohammad Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
B
Beigzadeh, Mojtaba Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Boutorabi, Seyed Mohammad Ali Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
D
Dehghan, Maziar Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Delshad Chermahini, Mehdi Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
E
Ebadzadeh, Touradj Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Ebadzadeh, Touraj Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Ebrahimifar, Hadi Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Eshghi, Mahdi Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
G
Gallardo Lopez, Angela Maria Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Ghasemi, ali Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Ghasemi, Ali The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Ghasemi, Samad Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
H
Haghighi, Amir Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Hajiebrahimi, Maryam Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Hajiebrahimi, Maryam Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Halek, Farah Sadat Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Heidarpour, Akbar Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Hemmati, Alireza Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Hosseini, Mona Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Hosseinieh Farahani, Mohammad Mahdi Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
I
Irom, Elnaz Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
J
Jafari, Hossein Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Jafari, Robabeh Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
K
Kaki Sahneh, Kiarash Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Kargar, Mostafa Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Kazemi, Arqavan Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Kharazmi, Shahaboddin Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Khodaei, Mehdi Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Kolahgar Azari, kaveh Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Mahboubizadeh, Shahram Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Miresmaeili, Seyyed Mehdi Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Mirzaee, Omid Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Mirzaee, Omid Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Mohammadzadeh, Hurieh Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
Mohsenifar, Farhad Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Mollazadeh Beidokhti, Sahar The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Momeni, Hossein Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Montazeri-Pour, Mehdi Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Moradi, Danial Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Mousavi Nasab, Seyede Fateme The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
O
Ostadshabani, Mohsen Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Ostad Shabani, Mohsen Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
R
Rahmani Boldaji, Zahra The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Rahmani Boldaji, Zahra Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Rajabi, Masoud Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Razavi, Mansour Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Razavi, Mansour Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Razavi, Seyed Hossein Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Riazi, Amir Hosein Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
S
Sami, Neda The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Seyedraoufi, Zahra-Sadat Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Shahriyari, Hanieh The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Shanaghi, Ali The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Soleimani, Farshad Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Soleimani Roodi, Katayoon Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Souri, Ali Reza The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
T
Tayebifard, Seyed Ali Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Torkashevand, Masoumeh Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Torkian, Shahab The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Torkian, Shahab Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Torknik, Fatemeh SadatEffects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Y
Yousefi, Abbas The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Z
Zakeri, Mohammad Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
