Advanced Ceramics Progress

Advanced Ceramics Progress

Keyword Index
A
  • Additive Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
  • Additive Manufacturing Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
  • Ag Nanoparticles Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
  • Ag/Zn codoped TiO2 Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
  • Alkaline Compound Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
  • Al Metal Matrix Composites Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
  • Alumina Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
  • APS Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
  • Attenuation coefficient Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
B
  • Ball milling Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
  • Band gap Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
  • Band gap Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
  • Biodiesel Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
  • Biomaterials The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
  • Black oxide Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
C
  • Carbothermal Reduction and Nitridation Process Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
  • Catalyst recovery and reuse Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
  • CdWO4 Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
  • Ceramic Nanofibers The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
  • Chitosan Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
  • CoFe₂O₄ Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
  • Composite Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
  • Co-precipitation Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
  • Corrosion Resistance Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
D
  • Densification Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
  • Densification Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
  • Density Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
E
  • Electrospinning The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
  • Electro Spinning The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
  • Electrospun fibers Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
  • Equal Channel Angular Pressing Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
F
  • Ferrous sulfate Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
  • Finite element methods Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
  • FTIR Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
G
  • Gamma-ray Shielding Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
I
  • Implant advanced coatings The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
  • Infrared heating Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
K
  • KNN Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
L
  • Laser Power Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
M
  • Magnetic ceramics The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
  • Magnetic ceramics Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
  • Magnetite Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
  • MAX Phase Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
  • Mechanical milling Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
  • Mechanical properties Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
  • Mechanical properties Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
  • Microstructural Analysis Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
  • Microstructure Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
  • Monte Carlo Simulations Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
  • MoSi2 Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
N
  • Nanocomposite Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
  • Nanocomposite Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
  • Nanomaterials The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
  • Nanomaterials Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
  • Nanoparticles Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
  • Nanoparticles Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
  • Nanosepiolite Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
  • Nanostructured Thermal Barrier Coatings Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
  • Novel Precursors Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
P
  • Paritially Sintered Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
  • Photocatalysis Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
  • Photocatalytic activity Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
  • Piezoelectric Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
  • Poly-caprolactone (PCL) The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
  • Porous Composite Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
  • Protein interactions The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
R
  • Raman Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
  • Residual Stress Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
S
  • Si3N4 Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
  • SiAlON Composites Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
  • Silver dopant Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
  • Single-layer graphene oxide/Hydroxyapatite/Chitosan Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
  • Sintering Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
  • Solid-State Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
  • Solvothermal Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
  • Spark Plasma Sintering Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
  • Spark Plasma Sintering Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
  • Specific cost Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
  • SPS Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
  • SrFe12O19 The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
  • Synthesis Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
T
  • Taguchi design Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
  • Thermal Gradient Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
  • Ti3AlC2 Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
  • Ti-Cu alloy Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
  • Tissue engineering The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
  • Tissue engineering The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Z
  • Zirconium Diboride Ceramic Particles Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
  • ZnS/CdS Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
  • ZrB2 Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]