Abadi, Zahra Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Abdolazizi, Sara The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Aboutalebi, M.R. Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Abtahi, K. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Akbarpour Arbatan, Mohammad Reza Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Alipour, Saeid Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Alizadeh, Masoud Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Alizad Farzin, Yousef Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Amirimehr, Amir Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Aniseh, Nastaran Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Asadi Tabrizi, Roshanak Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Asjadi, Fatemeh Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Asjodi, Ali In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Azim-Araghi, Mohammad Esmaeil Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
B
Baghshahi, Saeid The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
D
Davoodpour, Mahdi Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Doostmohammadi, Ali Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
E
Ebadzadeh, Touraj Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Ebadzadeh, Touraj Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
FaqihImani, Azade Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Farahinia, Laleh Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
Fazlali, Alireza Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Feizpour, Mahdi Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
G
Ganjali, Monireh Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Ghaffarian, Zeinab Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Ghahremanzadeh, H. Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Ghasemi, Ebrahim Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Golzar Shahri, Mohsen Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
H
Hadavi, Mohammad Mehdi Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Hayati, Raziye Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Hesaraki, Saeed Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Heydari, Fatemeh Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Honarbakhsh Rauof, Abbas Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
J
Jafari, Azam Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Jafarian, Mojtaba Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Javaheri, Masoumeh Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
K
Kazemzadeh, Asghar Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Keihan Asl, Mahvash Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Khakpour, Zahra Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Kiani, Marzieh Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
L
Leisi Azar, Fariba Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
M
Maghsoudipour, Amir Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Manafi, Sahebali Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Massoudi, Abozar Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Mirzaee, Omid Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Mobasherpour, Iman Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Mobasherpour, Iman In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Mortazavi, Y. Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
N
Naghizadeh, R. The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Navidirad, Mahsa Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Nayebpashaee, Nasim Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
P
Pourhashem, Sepideh Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
R
Rahimipour, Hamidreza Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Raissi, Babak Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Razavi, Mansour In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Rezvani, Mohammad Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
Rezvani, Mohammad Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Riahifar, Reza Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
S
Saeri, MohammadReza Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Sahba Yaghmaee, Maziar Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Saidi, A. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Salahi, Esmaeil Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Salahi, Esmaeil In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Sangpour, Parveneh Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Sarpoolaky, H. Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Sedaghati, Hossein Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Seyedein, Seyed Hossein Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Shafyei, A. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
T
Taati-Asil, Fatemeh Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Tabean, S. Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Tafreshi, Reza Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Tajabadi, Fariba Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Tamizifar, M. Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
V
Vaezi, M.R. Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Z
Zamanian, Ali Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
