Ahmadi, Zohre Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Ahmadpour, Saideh Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Ajamein, H. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Aliasghari, H. Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Arabi, A. M. Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Arabi, M. Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Assa, F. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
B
Bastami, Hajieh The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Bavafa, P. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
D
Dashti Germi, Mohammad Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
E
Eshghinejad, P. Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
F
Faeghinia, Aida Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Farahinia, L. The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Farhadi, Khalil Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Farnoush, H. Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
G
Ghayebloo, M. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Golestani Fard, Farhad Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Golmohammad, M. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Goodarzi, M. Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
H
Haghshenas Gorgani, Mehran Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Haji Shafiee, Hadi Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Hamidzadeh Mahaseni, Zahra Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Haratizadeh, H. Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
J
Jalilpour, Marzieh Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Javaheri, Masoumeh Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
K
Kalantarian, M. M. Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Karimi Abadeh, Hooman Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
Khameneh Asl, Shahab Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
L
Lupascu, Doru C. The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
M
Madani, S. M. Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Mahmodi, S. Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Majidian, H. Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Mardi, Hussein Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Mirhosseini, S. H. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Mirkazemi, Seyed Mohammad Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Mirkazemi, S. M. Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Mirkazemi, S. M. Effect of Current Density, Temperature, and Contact Paste on Flash Sintered 8YSZ [Volume 5, Issue 3, 2019, Pages 8-14]
Moghaddam, M. Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Mohammad Alizadeh, Siavash Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Mohebbi, H. Effect of Current Density, Temperature, and Contact Paste on Flash Sintered 8YSZ [Volume 5, Issue 3, 2019, Pages 8-14]
Mohebbi, H. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Mohebbi, Hamed Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Molla Ahmad, A. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
N
Naderi, N. Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Nikzad, L. Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Nourmohammadi, Abolghasem The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
P
Poelman, Dirk The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
R
Rahimian, A. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Rezazadeh, M. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Rezvani, M. The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Rezvani, M. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Rezvani, Mohammad Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Rezvani, Mohammad Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
S
Sadeghian, Aliakbar Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Sajjadnejad, Mohammad Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
Salman Tabrizi, Nooshin Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Samiee, M. Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Sangpour, Parveneh Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Seyedraoufi, Z. S. Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Shahedi Asl, Mehdi Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Shajari, Y. Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Sharifi, L. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Sharifi, O. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Smet, Philippe F. The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
T
Taheri Nasaj, Ehsan The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Y
Yousefi Mashhour, H. Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Z
Zerafati, F. Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
