Aghaei, Alireza Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Ahmadi, Tahmineh In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Alimadadi, Majid The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Alizadeh, Masoud The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Arefkhani, Magid The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Arianpour, Farzin Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Azizieh, M. Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
B
Bagheri Lotfabad, Tayebe Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Baghshahi, Saeid Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Balak, Zohre Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
D
Dadfar, Mohammad Reza Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
E
Ebadzadeh, Touraj Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Ebadzadeh, Touraj Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Ebadzadeh, Touraj Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Esfandiari, Samyar Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Eshraghi, Mohamad Javad Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Eshraghi, Mohammad Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Eshraghi, Mohammad Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Eshraghi, Mohammad Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Eshraghi, Mohammad Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
F
Faeghinia, Aida Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Faeghinia, Aida The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Farshidfar, Farshad Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Fathi, M. H. In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Fazlali, Alireza Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
G
Ganjkhanlou, Yadolah Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Ghasemi, Ebrahim The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Ghofrani, Samaneh Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Gholamzadeh, A. Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Golestani Fard, Farhad Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
H
Hashemibeni, Batool In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Hesaraki, Saeed Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Honarvar Nazari, Heydar Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
I
Illbeigi, Mohammad Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
J
Jabbari, Ebrahim Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
K
Kafashan, H. Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Kargar Razi, Maryam Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Kazazi, Mahdi Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Kazemzad Asiabi, Mahmood Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Khanlarkhani, Ali Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Khanlarkhani, Ali Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Kianpour Rad, Mansoor Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Krishna, Munishamaiah Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
L
Lak, Faranak Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
M
Maghsoudi, Amir Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Mahmoudi, Shirin Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Majidian, Hudsa Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Manavizadeh, Negin Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
Massoudi, Abouzar Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Massoudi, Abozar Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Massoudi, Abozar Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Mohammadi, Amir.H. Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Mohammadifar, Mahshid Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Monshi, A. In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Moradi, Morteza Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Mortazavi, Ali Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Mortazavi, Vajihosadat In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
N
Nadar, Nandini Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Naderi, Nima Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Naderi, Nima Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Naderi, Nima Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Naderi, Nima Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Naeimi, Farid Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Nangir, Mahya Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Nemati, A. Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Nikzad, Leila Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
O
Orshesh, Ziba Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
R
Rafiaei, Seyed Mahdi Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
Rahimipoor, Mohammad Reza The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Rahimipoor, Mohammad Reza Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Rahimipoor, Mohammad Reza Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Rasi, Sanaz Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Razavi, Mansour Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Razavi, Mansour Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Razavi, Mansour The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Rezaei, Mehran Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Rezaie, HamidReza Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Rezvani, Mohammad Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
S
Salahi, Esmaeil Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Saraei, Ahmad Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Sedaghat Ahangari Hossein Zadeh, Ali Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Shahbazi, Mehran Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Shahgoli, Nafiseh Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Sharifnabi, Ali Akbar In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Soleimani, Farshad Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
T
Tahari, Mostafa Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Tayebifard, Seyed Ali Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Tayebifard, Seyed Ali Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
V
Vaezi, M.R. Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Y
Yarmand, Benyamin Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Yarmand, Benyamin Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Yazdani Rad, Rahim Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Z
Zakeri, Mohammad Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Zakeri, Mohammad Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
