Advanced Ceramics Progress

Advanced Ceramics Progress

Keyword Index
A
  • Absorber Layer Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Air Plasma Spray Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Al The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Alumina matrix Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Aluminum Alloy The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Anodized Titanium Dioxide Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
B
  • BET Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Biomedical applications In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • BK7 glass Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • BMIm[OH] Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Bond strength Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Bone cements Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
  • Borosilicate glasses Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
C
  • Calcination kinetics Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Carbon nanotubes Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Catalyst Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • CDS Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • CdTe Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Centrifuge casting The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • CeO2 Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • Ceramic/ metals composite Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • CO Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
  • Composite Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Composite The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Cordierite Glass Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
  • Cubical crystal structure Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • CuInAlSe2 Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Current Density Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
  • Cyclic Voltammetry Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
D
  • Densification Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
E
  • Elecrodeposition Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Electrical and Optical Properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • Electrical resistivity Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
  • Electron Beam Evaporation Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Electron Microscopy Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
F
  • FT Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
G
  • Gelatin Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
H
  • HF/H2O2 ratio Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
  • High Energy ball milling Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
I
  • In In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Injection Molding The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • Ionic Liquid Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • IR Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • ITO thin films Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
K
  • KNN Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
L
  • LiNO3 electrolyte Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Lithium Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Luminescence Properties Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
M
  • Magnesium The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • MASHS Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Mechanical activation Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • Mechanical activation In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Mechanical milling Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Mechanical properties Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Mechanism Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Mg In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • MgTiO3 Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
  • Microstructure Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Microwave sintering Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
N
  • Nano Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
  • Nano Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
  • Nano The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • Nano-Size Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Nanostructured materials In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • Nanotubes Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • NASICON Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Nb2O5 Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
  • Ni Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
O
  • Optical band gap Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Optical properties Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
  • Optical properties Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
P
  • Palladium Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
  • Phase Characterization Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Phase evolution Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Phase transformation Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
  • Phosphors Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
  • Photosensitizer Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Plasma spray Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
R
  • Reflection properties Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
  • Resistive switching Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
  • Rheological chracteristics The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
S
  • Scan Rate Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
  • Si In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
  • SiC powder The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
  • SILAR process Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Sintering Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • Solar Cell Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • Solar Cell Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
  • Solid state Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
  • Spark Plasma Sintering Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Spherical powders Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
  • Stability Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
  • Steel Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
  • Structural properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
T
  • Taguchi method Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
  • Tantalum carbide Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
  • TEM Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
  • Thin film Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
  • TiB2 Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • TiC Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
  • TiO2 nanosphere Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
  • Titanium dioxide Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
V
  • Vitro Biocompatibility In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
W
  • WC The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
  • WC Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
X
  • XRD Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Y
  • YSZ Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Z
  • ZnO Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
  • ZrB2-SiC composites Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]