Abadi, Zahra Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Abbasi, M. H. Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Abbasian, Ahmad Reza The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
Abdi, Zahra Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Abdi Maghsoudlou, Mohammad Sadegh Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Abdolazizi, Sara The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Abdollahi, Elaheh Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Abdollahi, M. Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Abouei, V. Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Aboutalebi, M.R. Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Abtahi, K. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Afghahi, Seyed Salman Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Afshari, Faezeh A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Afsharian, Sepehr The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Afzali, Amir Hossein Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Afzali, Amir Hossein Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Afzali Gorouh, Mina Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
AfzaliTabar, M. Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Aghababaei, Hamed Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Aghababaeian, Shiva Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Aghaei, Alireza Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Aghaei, Alireza Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Aharipour, Nazli Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Ahmadi, K. Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Ahmadi, Kamran Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Ahmadi, S. Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
Ahmadi, Sara Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
Ahmadi, Tahmineh In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Ahmadi, Zohre Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Ahmadi Kordlar, A. Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Ahmadimoghadam, Hajar Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Ahmadi Nasab, Navid Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Ahmadpour, Saideh Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Ajamein, H. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Akbari Gandomani, Mahdieh The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Akbari Gandomani, Mahdieh Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Akbarpour, Mohammad Reza Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Akbarpour, Mohammad Reza Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Akbarpour, Mohammad Reza Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
Akbarpour, Mohammad Reza Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Akbarpour Arbatan, Mohammad Reza Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Akbarpour Arbatan, M. R. Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
Alaei, M. Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Alahgholiyan, E. Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Alamdari, Sanaz Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Alamdari, Sanaz Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Alamdari, Sanaz Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Alamdari, Sanaz Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Alamdari, Sanaz Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Alhaji, Amir Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Aliasghari, H. Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Alidoosti Shahraki, Fatemeh Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Alimadadi, Majid The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Alipoor, Mohammadreza Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
Alipour, Saeid Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Alizadeh, Ali Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Alizadeh, Ali Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Alizadeh, Masoud Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Alizadeh, Masoud The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Alizadeh, Masoud Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Alizad Farzin, Yousef Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Almasi Kashi, Mohammad Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Amanat, Bentolhoda Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Amanat, Bentolhoda Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Amani, Nima Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
Ameri, Farshad Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Ameri Ekhtiarabadi, T. The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
Aminy, Mohammad Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Amiri Kerahroodi, Mohamad Sadegh The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Amirimehr, Amir Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Aniseh, Nastaran Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Arabi, A. M. Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Arabi, Amir Masoud Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Arabi, M. Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Arasteh, J. Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
Arefkhani, Magid The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Arianpour, Farzin Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Arianpour, Farzin Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Asadian, Keivan Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Asadian, Keivan Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2026]
Asadi Tabrizi, Roshanak Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Asgari, S. Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Asgari, S. Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Ashofteh, Afshin Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Asjadi, Fatemeh Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Asjodi, Ali In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Askari Zamani, M. A. Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Aslibeiki, B. Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Assa, F. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Azadikhah, Komeil Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Azim-Araghi, Mohammad Esmaeil Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Azizi, A. Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Azizi, F. Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Azizieh, M. Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
Azizieh, M. Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
B
Badiei, A. Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Badiei, A. Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Badr-Mohammadi, M. R. Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Baghaban Eslaminejad, Mohamadreza In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Bagheri Lotfabad, Tayebe Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Baghshahi, Saeid The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Baghshahi, Saeid Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Bahamirian, Milad A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
Baharvandi, H. R. The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Bakhsheshi-Rad, Hamidreza Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Balak, Z. Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Balak, Z. Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
Balak, Zohre Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
Balak, Zohre Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Balooch, Ali Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Barfi Sistani, Pooneh Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Basheer, Haythem S The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Bastami, Hajieh The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Bavafa, P. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Bazargan-Lari, Reza. Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Behforouz, Babak Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Behnamghader, Ali Asghar Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Behtaj, Mohammad Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets [Volume 3, Issue 4, 2017, Pages 34-40]
Behzadnasab, M. Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Beigzadeh, Mojtaba Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Beitlafteh, S. TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Bini, Marcella Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Borhan, S. In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Borhan, S. Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Boutorabi, Seyed Mohammad Ali Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
C
Capsoni, Doretta Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Chameh, B. Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Choi, Gyeong Man Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
D
Dadfar, Mohammad Reza Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Dalouji, V. Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Dalouji, V. Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Dalouji, Vali Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Dashti Germi, Mohammad Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Davallo, Mehran Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Davoodpour, Mahdi Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Dehghan, Maziar Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Dehghani, P. Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Dehghanpour, Safoura BakhodayeCharacterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Delshad Chermahin, M. Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Delshad Chermahini, Mehdi Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
Doostmohammadi, Ali Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Doudkanlouy Milan, Behnam Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
E
Ebadzadeh, T. Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Ebadzadeh, Touradj The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Ebadzadeh, Touradj Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Ebadzadeh, Touradj Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2026]
Ebadzadeh, Touraj Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Ebadzadeh, Touraj Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Ebadzadeh, Touraj Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Ebadzadeh, Touraj Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Ebadzadeh, Touraj Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Ebadzadeh, Touraj The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Ebadzadeh, Touraj Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Ebadzadeh, Touraj Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Ebrahimi, Sema Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
Ebrahimifar, H. The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
Ebrahimifar, Hadi Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Ebrahimifar, Hadi Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Eftekhari Yekta, Bijan In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Ehsani, M. H. Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Ehsani, N. The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Eisaei, Mahin Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
Enayati, M. H. Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Enayati, Mohammad Hossein Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Esfahani, H. Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Esfandiari, Samyar Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Eshghi, Mahdi Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
Eshghinejad, P. Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
Eshraghi, M. J. Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Eshraghi, M. J. Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Eshraghi, Mohamad Javad Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Eshraghi, Mohamad Javad Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Eshraghi, Mohamad Javad Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Eshraghi, Mohamad Javad Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
Eshraghi, Mohammad Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Eshraghi, Mohammad Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Eshraghi, Mohammad Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Eshraghi, Mohammad Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Eshraghi, Mohammad Javad Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Eshraghi, Mohammad Javad Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Esmaeeli, S. The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Esmaeilzadeh, J. Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Esmaeilzadeh, J. In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Esmaeilzadeh, J. Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Etemadi, E. Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
F
Faeghinia, A. An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Faeghinia, A. Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Faeghinia, Aida Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Faeghinia, Aida The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Faeghinia, Aida Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Faeghinia, Aida The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Faeghinia, Aida K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
Fahim, Javad Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Fakhrizadeh, A. A. Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Fakoori, Mohsen Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Fallahazad, Parisa Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Fallah Pazhand Dakheli, Mohammadreza The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
FaqihImani, Azade Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Farahbakhsh, Iman Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
Farahinia, L. The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Farahinia, L. An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Farahinia, L. Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Farahinia, Laleh Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
Farhadi, Khalil An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Farhadi, Khalil Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Farhadian, Mousa Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
Farnoush, H. Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
Farooghi, Mohamad The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Farshidfar, Farshad Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Farvizi, Mohammad Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Farvizi, Mohammad Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Fathi, M. H. In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Fathi Dehkharghani, A. M. Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
Fazeli, Mohammadreza Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Fazlali, Alireza Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Fazlali, Alireza Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Feizpour, Mahdi Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Ferrari, Stefania Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Forghani, Wrya Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
G
Gallardo Lopez, Angela Maria Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Ganjali, Monireh Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Ganjkhanlou, Yadolah Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Ghaderi, Razieh Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Ghaedi, M. Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Ghaffari, A. Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Ghaffarian, Zeinab Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Ghahari, Mehdi Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Ghahremanzadeh, H. Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Ghanbari, Hossein Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Ghasemi, ali Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Ghasemi, Ali Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Ghasemi, Ali The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Ghasemi, Ebrahim The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Ghasemi, Ebrahim Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Ghasemi, Ebrahim Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Ghasemi, Samad Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Ghatee, M. Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Ghatee, Mojtaba Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Ghayebloo, M. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Ghayebloo, Masoomeh Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Ghezel-Ayagh, M. M. Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Ghiass, Majid Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Ghofrani, Samaneh Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Ghofrani, Samaneh Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Gholamzadeh, A. Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Ghorbani, Hamed Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Goldooz, H. Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Golestani Fard, Farhad Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Golestani Fard, Farhad Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Golmohammad, M. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
GolshanBafghi, Zohreh A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Golzar Shahri, Mohsen Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Goodarzi, M. Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Gordani, Gholamreza Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Goudarzi, S. Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
H
Hadavi, Mohammad Mehdi Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Hadavi, Mohammad Mehdi An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
Haghighi, Amir Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Haghshenas Gorgani, Mehran Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Hajabbasi, M. A. Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Hajati, S. Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Haj Fathalian, Maryam Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Hajiebrahimi, Maryam Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Hajiebrahimi, Maryam Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Hajiebrahimi, Maryam Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Hajiebrahimi, Maryam Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Haji Shafiee, Hadi Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Halek, Farah Sadat Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Hamidi, S. Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Hamidzadeh Mahaseni, Zahra Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Hamrahi, Behnaz Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Hanachi, M. Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Hanifeh, Younes Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Hanifi, A. Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
Haratizadeh, H. Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Hashemibeni, Batool In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Hasheminia, Susan The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Hatefi, Yousef Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Hatefi-Kargan, Naser Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Hayati, R. Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Hayati, R. Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Hayati, Raziye Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Hayati, Raziye Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Heidari, F. Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Heidarpour, Akbar Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Hemmati, Alireza Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Hesaraki, S. In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Hesaraki, S. Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Hesaraki, Saeed Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Hesaraki, Saeed Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Hesaraki, Saeed An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Hesaraki, Saeed Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Hesaraki, Saeed Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Hesari, F. Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Hessari, F. AlikhaniSynthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Heydari, Fatemeh Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Heydari, Mojgan Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Heydaryan, Kamran Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Heydarzadeh Sohi, M. Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Honarbakhsh Rauof, Abbas Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Honarvar Nazari, Heydar Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Hooshmand, S. Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Hosseini, Mona Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Hosseinieh Farahani, Mohammad Mahdi Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Hosseinieh Farahani, Mohammad Mahdi Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Hosseinifard, M. Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Hosseinifard, M. Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Hosseini Zori, Maryam Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Hosseinzadeh, Ghader Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
Houshyar Eftekhari, Seyed Davoud Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
I
Ibrahim, Jamal Eldin Fadoul Mohammed The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Illbeigi, Mohammad Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Irankhah, A. TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Irankhah, R. Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Irankhah, Reza In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Irankhah, Reza Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Irom, Elnaz Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
J
Jabbari, Ebrahim Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Jabraili, Masoud A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Jabraili, Masoud Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Jafari, A. H. Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Jafari, Azam Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Jafari, Hossein Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Jafari, Robabeh Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Jafari, Robabeh Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
Jafarian, Mojtaba Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Jalali-Bazehur, MohammadReza Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Jalilpour, Marzieh An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Jalilpour, Marzieh Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Jamshidi Aval, Hamed Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Javadpour, Jafar In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Javaheri, Masoumeh Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Javaheri, Masoumeh Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Jeddi, Kazem Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
Joughehdoust, S. Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
K
Kafashan, H. Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Kaki Sahneh, Kiarash Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Kaki Sahneh, Kiarash Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Kalantar, Mahdi OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Kalantarian, M. M. Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Kalantarian, Mohammad Mahdi Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Kalantarian, Mohammad Mahdi Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Kalantarian, Mohammad Mahdi Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Kameli, Mohammad Javad Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Kameli, P. Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Karamzadeh, Leila Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Kargar, Mostafa Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Kargar Razi, Maryam Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Karimi, Leila Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Karimi, Mahya Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Karimi Abadeh, Hooman Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
Karimzadeh, Fathallah Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Karimzadeh, Misagh Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Kasaeipoor Naeini, P. Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Kaveh, Mohammad Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Kaveh, Reza An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Kavei, Ghassem Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Kazazi, Mahdi Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Kazemi, Arqavan Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Kazemi, Asieh Sadat Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Kazemi, Faramarz Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Kazemi, Milad Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Kazemzad Asiabi, Mahmood Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Kazemzad Asiabi, Mahmood Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Kazemzadeh, A. Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Kazemzadeh, Asghar Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Kazerani Vahdani, Mohammad Reza Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Keihan Asl, Mahvash Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Khakpour, Zahra Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Khakpour, Zahra Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Khakpour, Zahra The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Khakpour, Zahra K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
Khalili, A. Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Khameneh Asl, Shahab Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Khanlarkhani, Ali Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Khanlarkhani, Ali Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Khanlarkhani, Ali Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Khanlarkhani, Ali Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Kharazmi, Shahaboddin Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Khecho, A. Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Khiabani, A. Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Khodaei, M. The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Khodaei, Mehdi Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Khoshhal, Razieh The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Khoshhal, Razieh Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Khosravi, Mina OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Khosravi, Moshkan Dokht Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Kiani, M. A. Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Kiani, Marzieh Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Kiani-Rashid, Alireza Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Kianpour Rad, Mansoor Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Kianpour Rad, Mansoor Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Kiarostami, Vahid Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Kolahgar Azari, kaveh Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Kolahgar Azari, Kaveh Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Koohestani, Hassan Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Koohi, Mohaddeseh A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Koohi, Mohaddeseh Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Lak, Faranak Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Leisi Azar, Fariba Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Lupascu, Doru C. The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
M
Madani, Parisa Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Madani, S. M. Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Maghsoudi, Amir Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Maghsoudipour, Amir Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Maghsoudipour, Amir Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Mahboubizadeh, Shahram Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Mahmodi, S. Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Mahmoudi, Shirin Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Majidian, H. Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Majidian, Hudsa Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Majidian, Hudsa The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Majidian, Hudsa Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Maleki, Zahra Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Malek Khachatourian, Adrine Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Malek Khachatourian, Adrine Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Manafi, S. Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Manafi, S. Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Manafi, Sahebali Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Manafi, Sahebali Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
Manavizadeh, Negin Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
Manavizadeh, Negin A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Mansourinejad, Noushin Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Maraki, Mohammad Reza Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Mardani Ghahfarrokhi, Peyman Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Mardi, Hussein Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Massoudi, A. Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Massoudi, A. Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Massoudi, Abouzar Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Massoudi, Abouzar Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Massoudi, Abouzar Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Massoudi, Abouzar Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Massoudi, Abouzar Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Massoudi, Abozar Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Massoudi, Abozar Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Massoudi, Abozar Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Massoudi, Abozar Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Mergen, Ayhan The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Mirershadi, Soghra Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
Mirershadi, Soghra Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
Miresmaeili, Seyyed Mehdi Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Mirhosseini, S. H. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Mirjalili, F. Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Mirjalili, Fatemeh Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
Mirkazemi, Seyed Mohammad Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Mirkazemi, S. M. Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Mirkazemi, S. M. Effect of Current Density, Temperature, and Contact Paste on Flash Sintered 8YSZ [Volume 5, Issue 3, 2019, Pages 8-14]
Mir Mohammadi, Ramin A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Mirzaee, Omid Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Mirzaee, Omid Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Mirzaee, Omid Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Mirzaee, Omid Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Mirzaee, Omid Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Mirzaee, Omid Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Mobasherpour, I. Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Mobasherpour, Iman Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Mobasherpour, Iman In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Mobasherpour, Iman Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Mobasherpour, Iman An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
Moghaddam, M. Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Mohammad Alizadeh, Siavash Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Mohammadi, Amir.H. Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Mohammadifar, M. Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Mohammadifar, Mahshid Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Mohammadi Hafshejani, T. Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Mohammad Sadeghi, B. Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Mohammadzadeh, Hurieh Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Mohammadzadeh, Hurieh Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
Mohassel, Abbas Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Mohebbi, H. Effect of Current Density, Temperature, and Contact Paste on Flash Sintered 8YSZ [Volume 5, Issue 3, 2019, Pages 8-14]
Mohebbi, H. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Mohebbi, Hamed Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Mohsenifar, Farhad Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Mohsenifar, Farhad Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Molaei, M. J. Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Molaei, Mohammad Jafar Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Molaei, Mohammad Jafar Ca-Al Layered Double Hydroxide/ZIF-67 Metal-Organic Framework (LDH/MOF) Nanocomposites for Drug Delivery Application [Volume 11, Issue 3, 2025, Pages 133-23]
Molla Ahmad, A. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Mollazadeh Beidokhti, Sahar Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Mollazadeh Beidokhti, Sahar The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Momeni, Hossein Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Moniri Javadhesari, Solmaz A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Moniri Javadhesari, Solmaz Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Moniri Javadhesari, Solmaz Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Monshi, A. In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Montazeri-Pour, Mehdi Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Moradi, Danial Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Moradi, Danial Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Moradi, Morteza Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Moradi, Morteza Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Moradi Alborzi, M. Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Mortazavi, Ali Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Mortazavi, Seyedeh Zahra Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
Mortazavi, Vajihosadat In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Mortazavi, Y. Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Mortazavi Nik, Saeid Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Mosavi Mashhadi, Mahmoud Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Mousavi, Amin Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Mousavi, S. A. TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Mousavi Nasab, Seyede Fateme The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Mustarelli, Piercarlo Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
N
Nadar, Nandini Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Naderi, N. Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Naderi, N. Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Naderi, Nima Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Naderi, Nima Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Naderi, Nima Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Naderi, Nima Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Naderi, Nima Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
Naderi, Nima Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Naeimi, F. Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Naeimi, Farid Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Naghizadeh, R. Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Naghizadeh, R. The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Nahvi, S. M. Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
Nahvi, S. M. Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
Namiranian, Afshin Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Nangir, M. Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Nangir, Mahya Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Nasehi Gogajeh, Narges In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Nasrollahnezhad, Rana The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Navidirad, Mahsa Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Nayebpashaee, N. Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Nayebpashaee, Nasim Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Nemati, A. Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Nemati, Ali Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Nemati, Ali Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Newpour, Ali Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Nezafati, Nader An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Nezafati, Nader Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Niazmand, Morteza Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Nikzad, L. Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Nikzad, Leila Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Nikzad, Leila The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Nikzad, Leila Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Nikzad, Leila Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
Nikzad, Leila The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Nilforoushan, M. Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Noferesty, E. Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
Noori, Aziz Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Noori, Aziz Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
Norouzi Palangani, Fatemeh Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Nourmohammadi, Abolghasem The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
O
Oghbaei, Morteza Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Omidvar, Hamid Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Omidvar-Askary, Najmeh The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
Orshesh, Ziba Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Ostadshabani, Mohsen Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Ostadshabani, Mohsen Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Ostad Shabani, Mohsen Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Ostad Shabani, Mohsen Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
P
Pakseresht, Amir Hossein Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Parvizian, Fahime Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Pazouki, M. Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Pirmohammadi, Parinaz The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Poelman, Dirk The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Pourhashem, Sepideh Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
R
Rabiee, S. M. Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Rabiee, S. M. An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Rafiaei, Seyed Mahdi Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
Rahimi, N. Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Rahimi, N. Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Rahimi, Nasim Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Rahimian, A. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Rahimipoor, Mohammad Reza The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Rahimipoor, Mohammad Reza Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Rahimipoor, Mohammad Reza In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Rahimipoor, Mohammad Reza Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Rahimipoor, Mohammad Reza Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Rahimipour, Hamidreza Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Rahimipour, Mohammad reza Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Rahimipour, Mohammad Reza Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Rahimipour, Mohammad Reza Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Rahimipour, M. R. Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
Rahimipour, M. R. Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Rahimipour, M. R. Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Rahimipour, M. R. Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Rahimpour, M.R. Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Rahmani Boldaji, Zahra The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Rahmani Boldaji, Zahra Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Rahmat, M. Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Raissi, Babak Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Raissi, F. Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Rajabi, Masoud Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Rajabi, Masoud Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Rajabi, Masoud The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Rajabi, Masoud Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Rajaei, Shahin Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Rasi, Sanaz Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Rasoulnezhad, Hossein Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Rasti, Mahtab An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Razavi, M. Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Razavi, Mansour In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Razavi, Mansour Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Razavi, Mansour Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Razavi, Mansour The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Razavi, Mansour In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Razavi, Mansour Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Razavi, Mansour The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Razavi, Mansour Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Razavi, Mansour Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Razavi, Mansour Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Razavi, Seyed Hossein Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Razavian, M. A. Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Rezaei, Ali Reza An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
Rezaei, Ghasem Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Rezaei, Mehran Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Rezaie, HamidReza Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Rezaie, HamidReza Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Rezakhani, D. Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Rezazadeh, Leila The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Rezazadeh, M. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Rezazadeh, M. An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Rezazadeh, M. Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Rezvani, M. The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Rezvani, M. Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Rezvani, M. An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Rezvani, M. Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Rezvani, M. Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Rezvani, M. Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Rezvani, M. Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
Rezvani, M. Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Rezvani, Mohammad Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
Rezvani, Mohammad Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Rezvani, Mohammad Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Rezvani, Mohammad Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Rezvani, Mohammad Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Rezvani, Mohammad An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Rezvani, Mohammad Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Rezvani, Mohammad Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Riahifar, Reza Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Riahi Nouri, Nastaran Investigation of the Substitution of Conventional Lead Oxide with a Lead Oxide-Silica Vitreous Composite in the Fabrication of Bi2223 Superconductor [Volume 11, Issue 2, 2025, Pages 36-41]
Riazi, Amir Hosein Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Roshangar, L. Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
S
Sabooni, Soheil Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Sadeghian, Aliakbar Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Sadeghilar, Elmira Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
Saeidifar, Maryam Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Saeri, MohammadReza Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Safari, Mojtaba Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Safarzadeh Kermani, P. Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Safavi, S. A. The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Sahba Yaghmaee, Maziar Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Sahragard, Rasool Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Saidi, A. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Sajjadnejad, Mohammad Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
Sajjadnejad, Mohammad Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Sakvand, Mohammad Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
Salahi, E. An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Salahi, E. Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Salahi, Esmaeil Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Salahi, Esmaeil In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Salahi, Esmaeil Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Salahi, Esmaeil Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Salahi, Esmaeil Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Salamati, H. Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Salami, R. K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
Salihi, Hassan Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Salman Tabrizi, Nooshin Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Sami, Neda The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Samiee, M. Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Samiee, Mohsen The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Sangian, Hamid Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Sangpour, P. Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Sangpour, Parveneh Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Sangpour, Parveneh Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets [Volume 3, Issue 4, 2017, Pages 34-40]
Sangpour, Parveneh Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Saraei, Ahmad Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Saraei, Ahmad Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Sarmast, Morteza Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Sarpoolaky, H. Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Sattari, Farhad Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
Sattari, Farhad Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
Sayadi Kelemi, Amir Hossein Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Sayyedan, F. S. Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Sedaghat Ahangari Hossein Zadeh, Ali Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Sedaghati, Hossein Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Sedehi, Syyed Mohammadreza Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Seifollahpour, Sana Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Setayesh, H. Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Setoudeh, Nader Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Setoudeh, Nader Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Seyedein, Seyed Hossein Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Seyedein, S. H. Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Seyedraoufi, Zahra Sadat The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Seyedraoufi, Zahra-Sadat Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Seyedraoufi, Z. S. Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Seyedraoufi, Z. S. Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Seyedraoufi, Z. S. Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Shafiee Afarani, Mahdi Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Shafyei, A. Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Shahbahrami, B. An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Shahbazi, Mehran Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Shahdadi, Amir Hossein Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Shahedi Asl, Mehdi Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Shahgoli, Nafiseh Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Shahriyari, Hanieh The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Shahsavari, Hasan Reza Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Shajari, Y. Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Shajari, Yazdan The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Shanaghi, A. Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Shanaghi, Ali Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Shanaghi, Ali The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Sharifi, Ali Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Sharifi, L. Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Sharifi, O. The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Sharifnabi, Ali Akbar In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Shavandi, Mojhgan Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Shayegh Boroujeny, B. Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Shidpoor, R. An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Shirani, Mahdi The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Shirvani, Kourosh Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Shojaeepour, Fahimeh Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Shojaie-Bahaabad, Maryam An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Shojaie-Bahaabad, Maryam Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
Shojaie-Bahaabad, Maryam Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Shokrvash, Hussein Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Siahpoosh, Seyed Mahdi Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Smet, Philippe F. The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Soleimani, F. Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Soleimani, F. Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Soleimani, Farshad Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Soleimani, Farshad Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Soleimani, Farshad Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Soleimani, Farshad Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Soleimani Roodi, Katayoon Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Soleymani Zarabad, M. Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
Soltani, Mohammad Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Souri, A. Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Souri, Ali Reza Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Souri, Ali Reza Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Souri, Ali Reza The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Souri, A. R. Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Souri, A. R. Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
T
Taati-Asil, Fatemeh Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Taati-Asil, Fatemeh Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Tabean, S. Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
Tafreshi, Reza Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Tahari, Mostafa Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Taheri, Mahdiar Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Taheri Goodarzi, Hojjat Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Taheri Nasaj, Ehsan The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Tajabadi, Fariba Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Tajabadi, Fariba Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Tajally, Mohammad Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Tajally, Mohammad Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Talafi Noghani, Mohammad The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Talezari, A. Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Tamizifar, M. Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Tavoosi, Majid Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Tavoosi, Majid Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Tayebifard, S. A. Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Tayebifard, Seyed Ali Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Tayebifard, Seyed Ali Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Tayebifard, Seyed Ali Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Torkashevand, Masoumeh Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Torkian, Shahab The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Torkian, Shahab Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Torknik, Fatemeh SadatEffects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Torknik, Fatemeh Sadat Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Torknik, F. S. Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
V
Vaezi, H. Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Vaezi, M.R. Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Vaezi, M.R. Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Vaezi, M.R. Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Vatanparast, Vahid The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Vatanpour, Vahid Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Y
Yaghobizadeh, O. The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Yaghoubi, Hamed Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Yarmand, Benyamin Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Yarmand, Benyamin Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Yarmand, Benyamin Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
Yarmand, Benyamin Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Yarmand, Benyamin Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Yazdani, A. Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Yazdani Rad, Rahim Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Yazdani Rad, Rahim Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Yousefi, Abbas The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Yousefi Mashhour, H. Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Yousefi Mashhour, Hatef Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Yousefizad, M. Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Yousefpour, Mardali Investigation of the Substitution of Conventional Lead Oxide with a Lead Oxide-Silica Vitreous Composite in the Fabrication of Bi2223 Superconductor [Volume 11, Issue 2, 2025, Pages 36-41]
Z
Zakeri, M. Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
Zakeri, M. Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Zakeri, Mohamad K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
Zakeri, Mohammad Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Zakeri, Mohammad In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Zakeri, Mohammad Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Zakeri, Mohammad The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Zakeri, Mohammad Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Zamani, Khashayar Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Zamanian, A. Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Zamanian, Ali Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Zamanian, Ali Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Zandrahimi, M. The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
Zavichi Turk, Kazem The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Zehtab, Behnam Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Zeinali, Ali Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Zerafati, F. Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
