Advanced Ceramics Progress

Keyword Index

A

AA2024 aluminum Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Abrasive Resistance The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
Absorber Layer Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
AC electrophoretic deposition Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Acetone An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Activated carbon Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Additive Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Additive Manufacturing Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Additive Manufacturing Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Additive Manufacturing Investigation of Fused Filament Fabrication Parameters for Producing Mechanically Stable SiC/Polymer Composite Green Parts [Volume 11, Issue 4, 2025, Pages 55-61]
Adsorbent beads Effect of Thermal Activation of Iranian Bentonite on Nickel Adsorption Properties from Synthetic Wastewater by Chitosan/Bentonite Composite [Volume 11, Issue 4, 2025, Pages 31-43]
Adsorption and self Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Ag Nanoparticles Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Agricultural waste Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Ag/Zn codoped TiO2 Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Air Plasma Spray Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Air plasma spraying (APS) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Al The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Al3Ni Intermetallic Compound Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Al–4%TiC Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
Al-ion batteries Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Alkaline Compound Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Alkaline Concrete Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
Alkaline fluoride salts Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Alkanes Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Alloy Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Al Metal Matrix Composites Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Alumina Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Alumina Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Alumina Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Alumina Optimizing Alumina Content in Leucite-Based Dental Glass-Ceramics: Crystallization, Microstructure, and Mechanical Properties [Volume 11, Issue 2, 2025, Pages 50-59]
Alumina matrix Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Alumina refractory castable The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
Alumina scaffold Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Alumina-zirconia composites Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Alumina-Zirconia-Mullite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Aluminide Coating Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Aluminum Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Aluminum Experimental Investigation of the Effect of Tool Rotational Speed and Initial Workpiece Temperature in Dry Milling on Energy Consumption, Hardness Variation, and Corrosion Rate of AA6061 Aluminum Alloy [Volume 12, Issue 1, 2026, Pages 36-45]
Aluminum Alloy The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Aluminum Alloy Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Aluminum alloys Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Aluminum and Graphite The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Aluminum Isopropoxide Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Aluminum Matrix Composites Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Aluminum nitride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Aluminum-silicon alloy Tribological enhancement of automotive A356 Al-Si alloy using plasma electrolytic oxidation coating reinforced with SiC nanoparticles [Volume 11, Issue 4, 2025, Pages 7-20]
Ammonia Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Amorphous AlPO4 Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Amorphous aluminosilicate phase Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Amorphous silica Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
AMZ composites The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Anode The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Anodized Titanium Dioxide Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Anodizing Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Anterior cruciate ligament Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Antibacterial Activity Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Antibacterial property Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Antifouling Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Antimicrobial coatings Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Antireflection Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
APS Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Aqueous electrolyte Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Atmospheric soiling A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Atomic force microscopy Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Attenuation coefficient Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]

B

Ba0.85Ca0.15Zr0.1Ti0.9O3 Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
BaF2 Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Ball milling Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Ball milling An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
Ball milling Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Band gap Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Band gap Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Band gap Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Band gap Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Bandgap Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Band gap engineering Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Barium aluminosilicate Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Barium Fluoride An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Barium titanate The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
Battery Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Bearing Area Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Bearing Area Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Bearing area percentage Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
BET Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Bi2223 bismuth-based superconductor Investigation of the Substitution of Conventional Lead Oxide with a Lead Oxide-Silica Vitreous Composite in the Fabrication of Bi2223 Superconductor [Volume 11, Issue 2, 2025, Pages 36-41]
Bi2O3 Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Bioabsorbable Screws Mechanical Properties Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Bioactive Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Bioactive Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Bioactive Glass Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Bioactive Glass Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Bioactive glass nanoparticles In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Bioactivity Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Bioactivity In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Bioactivity Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Bioactivity Evaluating in Vitro Calcium Phosphate Formation on the Surfaces of Synthesized Silanated Polymethylmethacrylate Microspheres [Volume 11, Issue 3, 2025, Pages 39-51]
Biocompatibility Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Biocompatibility Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Biodiesel Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Biomaterials Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Biomaterials The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Biomedical applications In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Bioscrews In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Bismuth borate glasses Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
Bismuth ferrite Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Bismuth titanate Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
BK7 glass Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Black oxide Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
BMIm[OH] Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Bond strength Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Bone Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Bone cements Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Bone tissue engineering Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Bone tissue engineering scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Borosilicate glasses Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]

C

Ca-Al Layered double hydroxide Ca-Al Layered Double Hydroxide/ZIF-67 Metal-Organic Framework (LDH/MOF) Nanocomposites for Drug Delivery Application [Volume 11, Issue 3, 2025, Pages 13-23]
CaF2 nanocrystals Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
Calcination kinetics Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Calcium phosphate cement Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Calcium phosphate glass Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Calcium titanate Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Canine Animal Model In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Capacitance Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Carbon Fibers Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Carbon Nanotube Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Carbon nanotubes Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Carbothermal Reduction and Nitridation Process Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Catalyst Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Catalyst Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Catalyst TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Catalyst recovery and reuse Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Cathode Materials Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Cathode Materials Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Cathodic electrodeposition Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
CDS Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
CdTe Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
CdWO4 Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
CdWO4 Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Ce dopant Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Cemented carbide Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Cementitious adhesive Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
Cementitious matrix composite Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Centrifuge casting The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
CeO2 Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Ceramic Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Ceramic Geopolymer-Based Ceramics, Raw Materials, Mechanisms, and Applications [Volume 12, Issue 1, 2026, Pages 16-35]
Ceramic Composite An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Ceramic core Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Ceramic electrode TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Ceramic floor tile Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Ceramic materials Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
Ceramic/ metals composite Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Ceramic Nanofibers The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Ceramic tile defect detection Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Chalcogenide Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Chalcogenide glass Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Characterization Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Chemical Enhanced Oil Recovery (C-EOR) Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Chemical etching Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Chemical Method Synthesis of Zinc Sulfide (ZnS) Nano-powder by Chemical Method [Volume 11, Issue 3, 2025, Pages 31-38]
Chemical properties Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
Chemical stability Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Chemical synthesis Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Chemical Vapor Deposition Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Chemical Vapor Deposition Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
CHIP From Machining Waste to Advanced Implants: Recycled Ti/GO Composite with Improved Mechanical Properties for Orthopedic Applications [Volume 11, Issue 4, 2025, Pages 44-54]
Chitosan Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Chitosan Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Chitosan/bentonite composite Effect of Thermal Activation of Iranian Bentonite on Nickel Adsorption Properties from Synthetic Wastewater by Chitosan/Bentonite Composite [Volume 11, Issue 4, 2025, Pages 31-43]
Chloride ion Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Cleaning Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
CNT Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
CO Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Coating Cauliflower Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Cobalt ferrite An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Cobalt oxide nanoparticles ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
CoFe2O4 Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
CoFe2O4 Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
CoFe₂O₄ Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Cold isostatic pressing Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Cold isostatic pressing Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Combined annual growth rate The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Combustion Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Composite Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Composite The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Composite Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Composite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Composite Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Composite Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Composite Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Composite Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Composites Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
Composites Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Compressability Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Compressibility Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Concentration ratios Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Concrete Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Condensation Silicone Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Construction and demolition waste Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
Copper hexacyanoferrate Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Copper oxide Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Co-precipitation Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Cordierite Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Cordierite Glass Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Cordierite honeycomb Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Corrosion behavior Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Corrosion Resistance The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Corrosion Resistance Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Cr Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Cristobalite Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Cristobalite Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Crystal Growth Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Crystallization Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Crystallization Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Crystallization Optimizing Alumina Content in Leucite-Based Dental Glass-Ceramics: Crystallization, Microstructure, and Mechanical Properties [Volume 11, Issue 2, 2025, Pages 50-59]
Crystallization Mechanism Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
CTAB Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
Cubical crystal structure Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Cu-Co Films Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
CuInAlSe2 Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
CuO/ZnO/Al2O3 catalyst Optimization of Synthesis Conditions and Characterization of a Ru-Promoted CuO/ZnO/Al₂O₃ Catalyst with Dual Applications [Volume 12, Issue 1, 2026, Pages 9-15]
CuO/ZnO composite Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Current Density Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Current Density The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
CuS Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
Cyclic oxidation Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Cyclic Voltammetry Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Cytotoxicity In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]

D

Decoration Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Deep Learning Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Defect The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Defect chemistry Unveiling Lithium-ion Migration Mechanisms in Anti-perovskite Solid Electrolytes: A Combined EIS and EDS Study of Defect Dynamics [Volume 12, Issue 2, 2026, Pages 1-10]
Degradability, Swelling An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Deign Of Experiments Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Densification Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Densification Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Densification Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Densification The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Densification Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Densification Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Density Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Density Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Density functional theory Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Density of states Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Density of states Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Density of states Magnetic Properties of Molybdenum- and Titanium-based MAX Phases: An Ab Initio Study [Volume 12, Issue 2, 2026, Pages 24-35]
Dental Impression Material Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Depth profile Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Desalination Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Design expert Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Design for Disassembly (DfD) technique Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
DFT Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Diamond-like carbon Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Diamond/WC-Co composite The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Dielectric Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Dielectric Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Dielectric Constant Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Dielectric properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Dielectric properties Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Dielectric properties Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Diffusion Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Diffusion Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Diffusion welding Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Dimethylformamide An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Dispersant The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
DLP Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
DNA A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Dolapix Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Doping Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Doping The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Doping Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Doping Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Doping Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Double heterojunction bipolar transistor Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Double Layer Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Drug Delivery Ca-Al Layered Double Hydroxide/ZIF-67 Metal-Organic Framework (LDH/MOF) Nanocomposites for Drug Delivery Application [Volume 11, Issue 3, 2025, Pages 13-23]
Dry Reforming TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
DSC Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
DSC analysis Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Durability Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]

E

ECV Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Effective parameter Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Egyptian green Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Elecrodeposition Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Electrical and Optical Properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
Electrical Properties Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Electrical resistivity Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Electrochemical deposition Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Electrochemical deposition Development of a Binder-Free Nanoworm NiOOH/NiO Electrode for Supercapacitors Through Anodic Electrodeposition: The Role of SDS Surfactant [Volume 12, Issue 2, 2026, Pages 11-23]
Electrochemical Etch Tuning Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Electrochemistry Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Electrochemistry Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Electro-deoxidation Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Electrodeposition Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Electrodeposition Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Electroless Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Electrolyte The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Electromagnetic stir casting Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Electron Beam Evaporation Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Electron Microscopy Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Electrophoretic deposition Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Electroplating The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Electroplating Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Electrospinning Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Electrospinning The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Electro Spinning The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Electrospun fibers Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Elliptical Cross-Section Spiral Equal Channel Extrusion A Comparative Study of Microstructure and Mechanical Properties in Copper Processed by Simple Shear Extrusion and Elliptical Cross-Section Spiral Equal-Channel Extrusion [Volume 11, Issue 4, 2025, Pages 21-30]
Emission Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Emission Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Environment Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Environmental Impact Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Epitaxial growth Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Equal Channel Angular Pressing Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Etching Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Etching rate Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Ethanol Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Ethanol Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Ethylene glycol An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
Experimental analysis Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]

F

FEM Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
FEM Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Ferroelectric Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Ferroelectric KNN Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Ferroelectrics The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
Ferromagnetic BFO Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Ferrous sulfate Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Fe-TiC/Al2O3 composites The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Fiber metal laminates Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Fibers Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Filling fraction Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Filling fraction Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Finite element method Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Finite element method Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Finite element methods Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Flexible and printed electronics Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Floor Til Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025, Pages 1-6]
Flowability Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Fluorapatite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Fluorapatite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Fluorapatite Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Flutter in composites Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Fly ash (FA) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Foam Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Forsterite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Fractal dimensions Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Fractal dimensions Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Fractal dimensions Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Fracture toughness Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Fracture toughness Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Fracture toughness Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Fracture toughness Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
Fracture toughness Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Freeze casting Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Freundlich isotherm model Effect of Thermal Activation of Iranian Bentonite on Nickel Adsorption Properties from Synthetic Wastewater by Chitosan/Bentonite Composite [Volume 11, Issue 4, 2025, Pages 31-43]
Frites K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
FT Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
FT Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
FTIR Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Functionally graded thermal barrier coating Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Functionally Graded Thermal Barrier Coating (FGTBC) Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Fused Filament Fabrication (FFF) Investigation of Fused Filament Fabrication Parameters for Producing Mechanically Stable SiC/Polymer Composite Green Parts [Volume 11, Issue 4, 2025, Pages 55-61]
Fused Silica Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]

G

Gallium Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Gamma-ray Shielding Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
Gas turbine The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
GDC composite Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
GdMnO3 Ceramics The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Ge Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Gelatin Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Gelatin Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Gel-Casting Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Gene Therapy A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Geopolymer-Based Geopolymer-Based Ceramics, Raw Materials, Mechanisms, and Applications [Volume 12, Issue 1, 2026, Pages 16-35]
GeSe Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Glass-ceramic Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Glass-ceramic Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Glass-ceramic Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Glass-ceramic Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Glass ionomer Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Glass Sealant Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Glaze K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
GO optical band gap Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
GO-silane Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Graphene Oxide Nanoplatelet Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Graphene Oxide thin film Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Graphite Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Green parts Investigation of Fused Filament Fabrication Parameters for Producing Mechanically Stable SiC/Polymer Composite Green Parts [Volume 11, Issue 4, 2025, Pages 55-61]
Green synthesis Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Green synthesis Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Growth Temperature Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Gum Uncertainty Evaluation of Residual Stress Measurement in Toughened Glass Using the Marshall–Lawn Indentation Model [Volume 11, Issue 3, 2025, Pages 52-58]

H

H2O Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
H2PtCl6.6H2O Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Hardness Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Hardness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Hardness An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Hardness Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Hardness Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Hardness Experimental Investigation of the Effect of Tool Rotational Speed and Initial Workpiece Temperature in Dry Milling on Energy Consumption, Hardness Variation, and Corrosion Rate of AA6061 Aluminum Alloy [Volume 12, Issue 1, 2026, Pages 36-45]
Hard porcelain Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Hardystonite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Heat treatment Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Heat treatment Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Heat treatment Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Heat treatment Optimizing Alumina Content in Leucite-Based Dental Glass-Ceramics: Crystallization, Microstructure, and Mechanical Properties [Volume 11, Issue 2, 2025, Pages 50-59]
Heterogeneous nucleation Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Heterojunction Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
HF Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
HfB2 Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
HfB2-SiC-Graphite Composite Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
HfB2-SiC-Nd2O3 Composite Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
HF/H2O2 ratio Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
High Energy ball milling Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
High-entropy alloys The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Hot pressing Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
HVOF Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
HVOF Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
Hydrothermal ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
Hydrothermal method Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Hydrothermal stability An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Hydroxide Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Hydroxide precursors Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Hydroxyapatite Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Hydroxyapatite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Hydroxyapatite Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Hydroxyapatite Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Hydroxyapatite Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Hydroxyapatite The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Hyperthermia An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]

I

Ilmenite The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Ilmenite Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Immiscible Metals Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Implant Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Implant advanced coatings The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
In In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Industrial policy Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Infrared heating Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Injectable composite An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Injection Molding The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Interface characteristics Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Interfacial Polymerization Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Intermetallics Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
In vitro Bioactivity Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Ionic Conductivity The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Ionic Liquid Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Ion-implantation Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
IR Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
IR Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
IR transmittance Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
ITO thin films Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]

L

La2Ce2O7 Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
Laser Power Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Lead free piezoceramics Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Leakage current test A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Leucite glass-ceramic Optimizing Alumina Content in Leucite-Based Dental Glass-Ceramics: Crystallization, Microstructure, and Mechanical Properties [Volume 11, Issue 2, 2025, Pages 50-59]
Li2FeSiO4 Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Li-ion batteries Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
LiNO3 electrolyte Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Liquid phase sintering Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Liquid-phase sintering The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Li Solid state electrolyte The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Lithium Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Lithium Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Lithium-ion Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Lithium Ion Batteries Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Lithium-ion battery Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Lithium-ion battery Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Lithium-ion conductivity Unveiling Lithium-ion Migration Mechanisms in Anti-perovskite Solid Electrolytes: A Combined EIS and EDS Study of Defect Dynamics [Volume 12, Issue 2, 2026, Pages 1-10]
Low Voltage Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
LTSOFC Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Luminescence Properties Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]

M

Macroporous Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Magnesia Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Magnesium Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Magnesium The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Magnesium Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Magnesium alloy Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Magnesium titanate Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Magnetic Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Magnetic ceramics The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Magnetic ceramics Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Magnetic hydroxyapatite Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Magnetic nanoparticle Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Magnetic nanoparticles Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Magnetic nanoparticles Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Magnetic properties Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Magnetic properties Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Magnetic properties The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Magnetite Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Magnetoviscous effect Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Manganite oxides Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Marshall-Lawn Model Uncertainty Evaluation of Residual Stress Measurement in Toughened Glass Using the Marshall–Lawn Indentation Model [Volume 11, Issue 3, 2025, Pages 52-58]
MASHS Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
MAX Phase Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
MAX phases Magnetic Properties of Molybdenum- and Titanium-based MAX Phases: An Ab Initio Study [Volume 12, Issue 2, 2026, Pages 24-35]
Mechanical- Activated Investigation of the Effects of Oven-Chemical and Mechanically Activated Techniques on the In Situ Synthesis of MoSi₂-SiC Nanocomposites by Self-Propagating High-Temperature Synthesis [Volume 12, Issue 1, 2026, Pages 1-8]
Mechanical activation Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Mechanical activation Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Mechanical activation In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Mechanical milling Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Mechanical milling Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Mechanical properties Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Mechanical properties An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Mechanical properties Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
Mechanical properties The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Mechanical properties Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Mechanical properties Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Mechanical properties Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Mechanical properties Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Mechanical properties Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
Mechanical properties Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Mechanical properties Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Mechanical properties Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Mechanical properties Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Mechanical properties Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Mechanical properties Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Mechanical properties The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Mechanical properties Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025, Pages 1-6]
Mechanical properties Optimizing Alumina Content in Leucite-Based Dental Glass-Ceramics: Crystallization, Microstructure, and Mechanical Properties [Volume 11, Issue 2, 2025, Pages 50-59]
Mechanical properties A Comparative Study of Microstructure and Mechanical Properties in Copper Processed by Simple Shear Extrusion and Elliptical Cross-Section Spiral Equal-Channel Extrusion [Volume 11, Issue 4, 2025, Pages 21-30]
Mechanical Property Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Mechanism Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Mechanism Geopolymer-Based Ceramics, Raw Materials, Mechanisms, and Applications [Volume 12, Issue 1, 2026, Pages 16-35]
Medical Implants Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Mesoporous silica Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Metal organic framework Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Methanol Production Optimization of Synthesis Conditions and Characterization of a Ru-Promoted CuO/ZnO/Al₂O₃ Catalyst with Dual Applications [Volume 12, Issue 1, 2026, Pages 9-15]
Methylene blue Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
Methyl Orange Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Mg In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
MgAl2O4 Spinel In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
MgO The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
MgTiO3 Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Micro-battery Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Micrograph Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Micron-sized SiC Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Microstructural Analysis Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Microstructural Properties A Comparative Study of Microstructure and Mechanical Properties in Copper Processed by Simple Shear Extrusion and Elliptical Cross-Section Spiral Equal-Channel Extrusion [Volume 11, Issue 4, 2025, Pages 21-30]
Microstructure Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Microstructure Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Microstructure Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Microstructure Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Microstructure Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
Microstructure Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Microstructure Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
Microstructure Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Microstructure Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Microstructure Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025, Pages 1-6]
Microstructure of sedimentation layer Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Microwave-assisted solution combustion synthesis Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Microwave dielectric Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Microwave sintering Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Microwave sintering Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Microwave sintering Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025, Pages 1-6]
Milling Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Milling Experimental Investigation of the Effect of Tool Rotational Speed and Initial Workpiece Temperature in Dry Milling on Energy Consumption, Hardness Variation, and Corrosion Rate of AA6061 Aluminum Alloy [Volume 12, Issue 1, 2026, Pages 36-45]
Milling parameters Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
Mixed alkali effect Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
Mn-Containing Glasses In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Modifier Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Molar Ratio The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Molar Ratio Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Molecular Dynamics Simulation Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Monte Carlo Simulations Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
MoS2 Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
MoSi2 Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
MoSi2-SiC Investigation of the Effects of Oven-Chemical and Mechanically Activated Techniques on the In Situ Synthesis of MoSi₂-SiC Nanocomposites by Self-Propagating High-Temperature Synthesis [Volume 12, Issue 1, 2026, Pages 1-8]
Multiferroic composites Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Multiferroic Materials The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Multi-layer polymer Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Multi-Principal Element Alloys The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]

N

Nafion Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Nano Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Nano Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Nano Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Nano The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Nano-alloy Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Nano and micron WO3 Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Nano array Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Nano Biocoatings In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Nanocomposite Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Nanocomposite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Nanocomposite Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Nanocomposite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Nanocomposite Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Nanocomposite Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Nanocomposite Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Nanocomposite Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
Nanocomposite Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Nanocomposite Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
Nanocomposite Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Nanocomposite Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Nanocomposite Investigation of the Effects of Oven-Chemical and Mechanically Activated Techniques on the In Situ Synthesis of MoSi₂-SiC Nanocomposites by Self-Propagating High-Temperature Synthesis [Volume 12, Issue 1, 2026, Pages 1-8]
Nanocomposites Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Nanohybrid Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Nano-hydroxyapatite Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Nano indentation Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Nano-indentation Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Nanoindentation Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Nanoindentation Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Nanomaterials The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Nanomaterials Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Nanoparticle Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Nanoparticle Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Nanoparticle Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Nanoparticles Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Nanoparticles A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Nanoparticles Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Nanoparticles Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Nanoparticles Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Nanoporous Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Nanoporous Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Nanoporous Membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Nano-powder Synthesis of Zinc Sulfide (ZnS) Nano-powder by Chemical Method [Volume 11, Issue 3, 2025, Pages 31-38]
Nanosepiolite Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Nano Sintering Additives Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Nano SiO2 Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Nano-Size Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Nanosized Materials The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Nanosphere Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Nanostructure Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Nanostructure Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Nano-structured hard-metal Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Nanostructured materials In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Nanostructured Thermal Barrier Coatings Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Nanostructures Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Nanostructures A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Nanostructure silica An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Nano-TiO2 The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
Nanotubes Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Nanotubes lateral size Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
NASICON Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Nb2O5 Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Ni Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Ni Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Ni-B4C nanocomposite Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Nickel-Chitosan Complex Effect of Thermal Activation of Iranian Bentonite on Nickel Adsorption Properties from Synthetic Wastewater by Chitosan/Bentonite Composite [Volume 11, Issue 4, 2025, Pages 31-43]
Nickel ferrite Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Ni/GDC20 Anode Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
NiO Development of a Binder-Free Nanoworm NiOOH/NiO Electrode for Supercapacitors Through Anodic Electrodeposition: The Role of SDS Surfactant [Volume 12, Issue 2, 2026, Pages 11-23]
Niobium pentoxide Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
NiOOH Development of a Binder-Free Nanoworm NiOOH/NiO Electrode for Supercapacitors Through Anodic Electrodeposition: The Role of SDS Surfactant [Volume 12, Issue 2, 2026, Pages 11-23]
Ni-P-GO Nanocomposite Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Ni-P-TiO₂ Coating Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Nitenpyram Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
NiTi Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Novel Precursors Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Numerical Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Numerical method Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]

O

Object detection algorithms Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Oleic acid A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Optical band gap Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
Optical band gap Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Optical band gap Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Optical Density Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Optical Density Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Optical Glass An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Optical Glass Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Optical properties Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Optical properties Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Optical properties Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Optical properties Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Optical response Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Organosol Synthesis The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
ORR Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Osteoinduction Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Oven-Chemical Investigation of the Effects of Oven-Chemical and Mechanically Activated Techniques on the In Situ Synthesis of MoSi₂-SiC Nanocomposites by Self-Propagating High-Temperature Synthesis [Volume 12, Issue 1, 2026, Pages 1-8]
Oxidation behavior Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Oxidation Resistance Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
Oxide films Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Oxide Precursor Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Oxyfluoride An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Oxyfluoride Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Oxy-Fluoride Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Oxyfluoride glass The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Oxyfluoride Glass-Ceramics Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]

P

PACVD Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
PACVD Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Palladium Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Paritially Sintered Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Pauli paramagnetism Magnetic Properties of Molybdenum- and Titanium-based MAX Phases: An Ab Initio Study [Volume 12, Issue 2, 2026, Pages 24-35]
PDLLA/PCL In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
PEMFC Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Perovskite Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Perovskite Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
Perovskite oxide Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Phase Characterization Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Phase composition The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Phase evolution Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Phase separation Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Phase stability A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
Phase stability Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Phase transformation Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Phase transformation Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Phase transformation phase stability Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Phosphate-based glass An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Phosphate-based glass Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Phosphate Glass-ceramics Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Phosphate Glass-ceramics Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Phosphors Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
Photocatalysis Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Photocatalysis Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Photocatalysis Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Photocatalytic ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
Photocatalytic activity Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets [Volume 3, Issue 4, 2017, Pages 34-40]
Photocatalytic activity Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Photocatalytic activity Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Photosensitizer Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Pickering emulsion Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Piezoceramic Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Piezocomposite Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Piezoelectric Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
Piezoelectric Properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Plasma electrolytic oxidation Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Plasma electrolytic oxidation Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Plasma electrolytic oxidation Tribological enhancement of automotive A356 Al-Si alloy using plasma electrolytic oxidation coating reinforced with SiC nanoparticles [Volume 11, Issue 4, 2025, Pages 7-20]
Plasma spray Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Plasma spray Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
PLASMA SPRAY FORMING Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Plasma spraying In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Platinum Infiltration Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
PMN-PT Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Poly-caprolactone (PCL) The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Polydimethylsiloxane Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Polymethyl methacrylate Evaluating in Vitro Calcium Phosphate Formation on the Surfaces of Synthesized Silanated Polymethylmethacrylate Microspheres [Volume 11, Issue 3, 2025, Pages 39-51]
Porcelain insulator A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Pore structure Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Porogen Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Porous Ceramics Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Porous Composite Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Porous Network Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Potassium sodium niobate Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Powder Metallurgy Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
Powder Metallurgy Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Powder processing Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Precipitation Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Pressureless sintering An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Pressureless sintering The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Printing parameters Investigation of Fused Filament Fabrication Parameters for Producing Mechanically Stable SiC/Polymer Composite Green Parts [Volume 11, Issue 4, 2025, Pages 55-61]
Protein interactions The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Pseudocapacitance Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Pseudomorphism Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Pt-Nanoparticles Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Pull out strength Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Pulse electrodeposition Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Pulse Electroplating Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]

R

Raman Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Raman spectroscopy Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Raman spectroscopy Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Rare earth The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Rare earth element Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Rare-earth Elements An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Rate capability Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Raw materials Geopolymer-Based Ceramics, Raw Materials, Mechanisms, and Applications [Volume 12, Issue 1, 2026, Pages 16-35]
Reaction sequence Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Reactive Spark Plasma Sintering Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Reactor TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Reconstruction Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Recycling From Machining Waste to Advanced Implants: Recycled Ti/GO Composite with Improved Mechanical Properties for Orthopedic Applications [Volume 11, Issue 4, 2025, Pages 44-54]
Reduced graphene Oxide Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Reflection properties Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Reinforcement Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Relative Density An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Rene-80 Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Repair Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Replacement Therapy Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Residual Stress Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Residual Stress Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Residual Stress Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Residual Stress Uncertainty Evaluation of Residual Stress Measurement in Toughened Glass Using the Marshall–Lawn Indentation Model [Volume 11, Issue 3, 2025, Pages 52-58]
Resistive switching Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Response Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
Response Surface Methodology Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
Retained strain The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Reverse co Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Reverse Osmosis Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Rheological chracteristics The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Rheological properties An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Rheological property Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Rheology Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Rheology Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Rice husk Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Ru Optimization of Synthesis Conditions and Characterization of a Ru-Promoted CuO/ZnO/Al₂O₃ Catalyst with Dual Applications [Volume 12, Issue 1, 2026, Pages 9-15]
Rubber Compound Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
Ruddlesden-Popper Phases Unveiling Lithium-ion Migration Mechanisms in Anti-perovskite Solid Electrolytes: A Combined EIS and EDS Study of Defect Dynamics [Volume 12, Issue 2, 2026, Pages 1-10]

S

Safavid Era Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Samarium Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Saturation magnetization Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
SBF An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Scaffold Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Scaffolds Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Scan Rate Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Scientometric Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Scientometrics The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Scratch Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
SDS surfactant Development of a Binder-Free Nanoworm NiOOH/NiO Electrode for Supercapacitors Through Anodic Electrodeposition: The Role of SDS Surfactant [Volume 12, Issue 2, 2026, Pages 11-23]
Se Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Segregation The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Self-cleaning A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Self-compacting mortar (SCM) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
SEM Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
SEM The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Semiconductor Glass Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Severe plastic deformation A Comparative Study of Microstructure and Mechanical Properties in Copper Processed by Simple Shear Extrusion and Elliptical Cross-Section Spiral Equal-Channel Extrusion [Volume 11, Issue 4, 2025, Pages 21-30]
SHS Investigation of the Effects of Oven-Chemical and Mechanically Activated Techniques on the In Situ Synthesis of MoSi₂-SiC Nanocomposites by Self-Propagating High-Temperature Synthesis [Volume 12, Issue 1, 2026, Pages 1-8]
Si In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Si3N4 Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Si3N4 Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
SiAlON Composites Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
SIC Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
SIC Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
SiC filament Investigation of Fused Filament Fabrication Parameters for Producing Mechanically Stable SiC/Polymer Composite Green Parts [Volume 11, Issue 4, 2025, Pages 55-61]
SiC nanoparticles Tribological enhancement of automotive A356 Al-Si alloy using plasma electrolytic oxidation coating reinforced with SiC nanoparticles [Volume 11, Issue 4, 2025, Pages 7-20]
SiC powder The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
SiC-TiC The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
SILAR process Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Silica Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Silica Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Silica Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Silica-alumina membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Silicon carbide Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Silicon carbide (SiC) The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Silicon nanowires Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Silicon Pyramid Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
SILVACO Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Silver dopant Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Simple shear extrusion A Comparative Study of Microstructure and Mechanical Properties in Copper Processed by Simple Shear Extrusion and Elliptical Cross-Section Spiral Equal-Channel Extrusion [Volume 11, Issue 4, 2025, Pages 21-30]
Simulated body fluid In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Simulated body fluid Evaluating in Vitro Calcium Phosphate Formation on the Surfaces of Synthesized Silanated Polymethylmethacrylate Microspheres [Volume 11, Issue 3, 2025, Pages 39-51]
Simulated body fluide solution Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Simulation Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Simulation Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Single-layer graphene oxide/Hydroxyapatite/Chitosan Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
Sintering Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Sintering Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Sintering The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Sintering Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Sintering The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Sintering Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Sintering Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Sintering The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Sintering process Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
SiO2 ceramic Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Slag Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025, Pages 1-6]
Small polaron hopping Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Sn Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Sodium Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
SOFC Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
SOFC The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
SO Guide 98 Uncertainty Evaluation of Residual Stress Measurement in Toughened Glass Using the Marshall–Lawn Indentation Model [Volume 11, Issue 3, 2025, Pages 52-58]
Solar Cell Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Solar Cell Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Sol-Gel Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Sol-Gel An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Sol-Gel Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Sol-Gel In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Sol-gel method Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
Solidification Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Solid oxide fuel cells Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Solid state Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
Solid state Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
Solid-State Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
Solid-state batteries Unveiling Lithium-ion Migration Mechanisms in Anti-perovskite Solid Electrolytes: A Combined EIS and EDS Study of Defect Dynamics [Volume 12, Issue 2, 2026, Pages 1-10]
Solid State Reaction The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Solvent Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Solvothermal Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Sonochemical Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Spark Plasma Sintering In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Spark Plasma Sintering Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
Spark Plasma Sintering Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Spark Plasma Sintering Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Spark Plasma Sintering Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Spark Plasma Sintering Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Spark Plasma Sintering Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Spark Plasma Sintering Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Spark Plasma Sintering Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Spark Plasma Sintering From Machining Waste to Advanced Implants: Recycled Ti/GO Composite with Improved Mechanical Properties for Orthopedic Applications [Volume 11, Issue 4, 2025, Pages 44-54]
Spark plasma sintering (SPS) Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Spark plasma sintering (SPS) Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
Spark plasma sintering (SPS) The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Spark Plasma Sintering . Wear Rate. Wear Mechanism The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Specific cost Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Spherical powders Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Spinels Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Spin glass Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
SPS Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
SPS Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Sputtering Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Sputtering Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
SrFe12O19 The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
SS316L implant Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
Stability Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Starch Consolidation Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Steel Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Stöber method Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Stoner criterion Magnetic Properties of Molybdenum- and Titanium-based MAX Phases: An Ab Initio Study [Volume 12, Issue 2, 2026, Pages 24-35]
Stress and Strain Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
Structural properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
Superalloy Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Supercapacitor Development of a Binder-Free Nanoworm NiOOH/NiO Electrode for Supercapacitors Through Anodic Electrodeposition: The Role of SDS Surfactant [Volume 12, Issue 2, 2026, Pages 11-23]
Superparamagnetic Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Surface analysis ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
Surface modification An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Surface Texturing Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Surfactants Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Synthesis Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Synthesis The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Synthesis Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Synthesis Synthesis of Zinc Sulfide (ZnS) Nano-powder by Chemical Method [Volume 11, Issue 3, 2025, Pages 31-38]
Synthesize Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]

T

Taguchi design Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Taguchi method Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Taguchi method Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
Tantalum carbide Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Tape casting Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Tape casting The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Targeted nucleic acid delivery A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
TEC K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
Tellurite glass Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
TEM Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
TEM Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Temperature Experimental Investigation of the Effect of Tool Rotational Speed and Initial Workpiece Temperature in Dry Milling on Energy Consumption, Hardness Variation, and Corrosion Rate of AA6061 Aluminum Alloy [Volume 12, Issue 1, 2026, Pages 36-45]
Tetraethylorthosilcate Evaluating in Vitro Calcium Phosphate Formation on the Surfaces of Synthesized Silanated Polymethylmethacrylate Microspheres [Volume 11, Issue 3, 2025, Pages 39-51]
Textural Properties Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
The CAZO Thin Films Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Thermal annealing Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Thermal barrier coating The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Thermal barrier coatings (TBCs) A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
Thermal expansionc oefficient Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Thermal Gradient Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Thermally activated bentonite Effect of Thermal Activation of Iranian Bentonite on Nickel Adsorption Properties from Synthetic Wastewater by Chitosan/Bentonite Composite [Volume 11, Issue 4, 2025, Pages 31-43]
Thermal shock Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Thermal stability Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Thin film Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Thin film Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Thixotropy Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Ti3AlC2 Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Ti6Al4V Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Ti-Al-C intermetallic compound Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Ti Alloy Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
TiB2 Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
TiC Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
TiCN Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Ti containing hydroxyapatite Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Ti-Cu alloy Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Ti-Cu alloy Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Tiles Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Tin Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
TiO2 Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
TiO2 The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
TiO2 Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
TiO2 Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
TiO2 The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
TiO2 Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
TiO2 nanoparticles Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
TiO2 nanoparticles Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
TiO2 nanosphere Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Tissue engineering Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Tissue engineering The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Tissue engineering The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Tissue Regeneration Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Titanium Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Titanium From Machining Waste to Advanced Implants: Recycled Ti/GO Composite with Improved Mechanical Properties for Orthopedic Applications [Volume 11, Issue 4, 2025, Pages 44-54]
Titanium diboride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Titanium dioxide Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Titanium nanotube Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Titanium substrates Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Tool Rotational Speed Experimental Investigation of the Effect of Tool Rotational Speed and Initial Workpiece Temperature in Dry Milling on Energy Consumption, Hardness Variation, and Corrosion Rate of AA6061 Aluminum Alloy [Volume 12, Issue 1, 2026, Pages 36-45]
Topography Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Topography Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Toughness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Toughness mechanisms The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Tragacanth An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Tragacanth Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Transparent Ceramic In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Tribological behavior Tribological enhancement of automotive A356 Al-Si alloy using plasma electrolytic oxidation coating reinforced with SiC nanoparticles [Volume 11, Issue 4, 2025, Pages 7-20]
Two Steps The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]

W

Waste ceramic powder (WCP) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Waste Management Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
Water Gas Shift reaction Optimization of Synthesis Conditions and Characterization of a Ru-Promoted CuO/ZnO/Al₂O₃ Catalyst with Dual Applications [Volume 12, Issue 1, 2026, Pages 9-15]
WC The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
WC Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
WC-Co Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
WC–Co Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
WC–FeCrAl Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
WC–NiMoCrFeCo Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
Wear Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Wear Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Wear Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Wear Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Wear resistance Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Wet-chemical method A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
WO3 Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
WO3 Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
WO3.H2O Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
WO3 nanoparticles Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
WO3-rGO Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Wollastonite In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Wollastonite Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]

Y

Y Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Y2O3 dopant The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Y3Al5O12 - MgAl2O4 Spinel Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
YAG: Cr Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Y-Glycidoxypropyltrimethoxysilane Evaluating in Vitro Calcium Phosphate Formation on the Surfaces of Synthesized Silanated Polymethylmethacrylate Microspheres [Volume 11, Issue 3, 2025, Pages 39-51]
YOLOv10 Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
YOLOv7 Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
YSZ Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
YSZ suspension Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
YSZ : ZrO2-8 wt. % Y2O3 A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
Yttria stabilized zirconia (YSZ) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Yttrium aluminum garnet Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]

Z

Ziconia Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
ZIF-67 Metal-Organic Framework (MOF) Ca-Al Layered Double Hydroxide/ZIF-67 Metal-Organic Framework (LDH/MOF) Nanocomposites for Drug Delivery Application [Volume 11, Issue 3, 2025, Pages 13-23]
Zinc oxide A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Zinc oxide nanoparticles Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Zinc Sulfide Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Zinc Sulfide Synthesis of Zinc Sulfide (ZnS) Nano-powder by Chemical Method [Volume 11, Issue 3, 2025, Pages 31-38]
Zircon The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Zirconia Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Zirconia nanoparticles Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Zirconium Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Zirconium Diboride Ceramic Particles Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Zirconium Oxide Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Zn content ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
ZnO Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
ZnO Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
ZnO K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
ZnO Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
ZnO Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
ZnO thin films Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
ZnS Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
ZnS/CdS Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
ZnWO4 Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
ZrB2 Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
ZrB2-30 vol% SiC Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
ZrB2-SiC Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
ZrB2-SiC composites Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
ZrO2 The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
Z-X topography Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]

Advanced Ceramics Progress

Keyword Index

A

B

C

D

E

F

G

H

I

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z