Advanced Ceramics Progress

Keyword Index

A

AA2024 aluminum Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Abrasive Resistance The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
Absorber Layer Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
AC electrophoretic deposition Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Acetone An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Activated carbon Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Additive Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Additive Manufacturing Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Additive Manufacturing Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Adsorption and self Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Ag Nanoparticles Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Agricultural waste Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Ag/Zn codoped TiO2 Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Air Plasma Spray Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Air plasma spraying (APS) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Al The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Al3Ni Intermetallic Compound Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Al–4%TiC Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
Al-ion batteries Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Alkaline Compound Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Alkaline Concrete Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
Alkaline fluoride salts Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Alkanes Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Alloy Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Al Metal Matrix Composites Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Alumina Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Alumina Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Alumina Investigating the Effect of Modifying the Binder and Other Additives on the Printability of Ceramic Paste for the Direct Ink Writing (DIW) Technique [Volume 10, Issue 4, 2024, Pages 15-24]
Alumina OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Alumina matrix Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Alumina refractory castable The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
Alumina scaffold Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Alumina-zirconia composites Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Alumina-Zirconia-Mullite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Aluminide Coating Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Aluminum Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Aluminum Alloy The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Aluminum Alloy Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Aluminum alloys Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Aluminum and Graphite The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Aluminum Isopropoxide Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Aluminum Matrix Composites Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Aluminum nitride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Ammonia Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Amorphous AlPO4 Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Amorphous aluminosilicate phase Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Amorphous silica Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
AMZ composites The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Anode The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Anodized Titanium Dioxide Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Anodizing Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Anterior cruciate ligament Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Antibacterial Activity Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Antibacterial property Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Antifouling Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Antimicrobial coatings Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Antireflection Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
APS Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Aqueous electrolyte Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Atmospheric soiling A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Atomic force microscopy Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Attenuation coefficient Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]

B

BaF2 Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Ball milling Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Ball milling An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
Ball milling Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Band gap Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Band gap Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Band gap Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Band gap Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Bandgap Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Band gap engineering Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Barium aluminosilicate Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Barium Fluoride An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Barium titanate The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
Based Superconductor.Lead Oxide Investigation of the Substitution of Conventional Lead Oxide with a Lead Oxide-Silica Vitreous Composite in the Fabrication of Bi2223 Superconductor [Volume 11, Issue 2, 2025, Pages 36-41]
Battery Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Bearing Area Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Bearing Area Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Bearing area percentage Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
BET Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Bi2223 Bismuth Investigation of the Substitution of Conventional Lead Oxide with a Lead Oxide-Silica Vitreous Composite in the Fabrication of Bi2223 Superconductor [Volume 11, Issue 2, 2025, Pages 36-41]
Bi2O3 Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Bioabsorbable Screws Mechanical Properties Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Bioactive Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Bioactive Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Bioactive Glass Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Bioactive Glass Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
Bioactive glass nanoparticles In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Bioactivity Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Bioactivity In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Bioactivity Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Biocompatibility Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Biocompatibility Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Biodiesel Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Biomaterials Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Biomaterials The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Biomedical applications In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Bioscrews In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Bismuth borate glasses Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
Bismuth ferrite Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Bismuth titanate Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
BK7 glass Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Black oxide Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
BMIm[OH] Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Bond strength Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Bone Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Bone cements Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Bone tissue engineering Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Bone tissue engineering scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Borosilicate glasses Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]

C

Ca-Al Layered double hydroxide Ca-Al Layered Double Hydroxide/ZIF-67 Metal-Organic Framework (LDH/MOF) Nanocomposites for Drug Delivery Application [Volume 11, Issue 3, 2025, Pages 133-23]
CaF2 nanocrystals Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
Calcination kinetics Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Calcium phosphate cement Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Calcium phosphate glass Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Calcium titanate Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Canine Animal Model In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
Capacitance Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Carbon Fibers Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Carbon Nanotube Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Carbon nanotubes Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Carbothermal Reduction and Nitridation Process Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Catalyst Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Catalyst Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Catalyst TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Catalyst recovery and reuse Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Cathode Materials Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Cathode Materials Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Cathodic electrodeposition Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
CDS Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
CdTe Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
CdWO4 Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
CdWO4 Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Ce dopant Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Cemented carbide Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Cementitious adhesive Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
Cementitious matrix composite Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Centrifuge casting The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
CeO2 Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Ceramic Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Ceramic Composite An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Ceramic core Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Ceramic electrode TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Ceramic floor tile Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Ceramic materials Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
Ceramic/ metals composite Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Ceramic Nanofibers The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Ceramic tile defect detection Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Chalcogenide Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Chalcogenide glass Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Characterization Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Chemical Enhanced Oil Recovery (C-EOR) Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Chemical etching Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Chemical properties Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
Chemical stability Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Chemical SynthesisFerroelectricMagneticCompositeCoFe2O4Ba0.85Ca0.15Zr0.1Ti0.9O3Doping Multiferroic Performance of BCZT/CFO Composites Tailored by Antimony and Yttrium Doping [Volume 11, Issue 2, 2025, Pages 24-35]
Chemical Vapor Deposition Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Chemical Vapor Deposition Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Chitosan Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Chitosan Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Chloride ion Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Cleaning Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
CNT Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
CO Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
Coating Cauliflower Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Cobalt ferrite An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Cobalt oxide nanoparticles ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
CoFe2O4 Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
CoFe₂O₄ Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Cold isostatic pressing Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Cold isostatic pressing Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Combined annual growth rate The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Combustion Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Composite Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Composite The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Composite Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Composite The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
Composite Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Composite Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Composite Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Composites Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
Composites Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Compressability Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Compressibility Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Concentration ratios Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Concrete Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Condensation Silicone Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Construction and demolition waste Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
Copper hexacyanoferrate Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Copper oxide Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Co-precipitation Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Cordierite Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Cordierite Glass Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Cordierite honeycomb Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Corrosion behavior Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Corrosion Resistance The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Corrosion Resistance Effect of pH of the Electroless Bath on Microstructure and Corrosion Behavior of Ni-Co-La2O3-CeO2 Coating [Volume 10, Issue 2, 2024, Pages 9-16]
Cr Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
Cristobalite Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
Cristobalite Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Crystal Growth Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Crystallization Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Crystallization Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Crystallization OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Crystallization Mechanism Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
CTAB Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
Cubical crystal structure Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Cu-Co Films Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
CuInAlSe2 Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
CuO/ZnO composite Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Current Density Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Current Density The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
CuS Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
Cyclic oxidation Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Cyclic Voltammetry Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Cytotoxicity In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]

D

Decoration Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Deep Learning Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Defect The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Degradability, Swelling An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Deign Of Experiments Identifying Effective Parameters for Ceramic Floor Tile Strength Using Design of Experiments Methodology [Volume 9, Issue 4, 2023, Pages 32-40]
Densification Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Densification Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Densification Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Densification The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Densification Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Densification Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Density Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Density Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Density functional theory Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Density of states Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Density of states Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Dental Impression Material Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Depth profile Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Desalination Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Design expert Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Design for Disassembly (DfD) technique Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
DFT Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Diamond-like carbon Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Diamond/WC-Co composite The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Dielectric Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Dielectric Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Dielectric Constant Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Dielectric properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Dielectric properties Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Dielectric properties Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Diffusion Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Diffusion Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Diffusion welding Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Dimethylformamide An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Dispersant The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
DLP Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
DNA A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Dolapix Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Doping Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Doping The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Doping Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Doping Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
Double heterojunction bipolar transistor Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Double Layer Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Drug Delivery Ca-Al Layered Double Hydroxide/ZIF-67 Metal-Organic Framework (LDH/MOF) Nanocomposites for Drug Delivery Application [Volume 11, Issue 3, 2025, Pages 133-23]
Dry Reforming TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
DSC Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
DSC analysis Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Durability Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]

E

ECV Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
Effective parameter Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Egyptian green Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Elecrodeposition Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Electrical and Optical Properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
Electrical Properties Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Electrical resistivity Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
Electrochemical deposition Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
Electrochemical Etch Tuning Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Electrochemistry Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Electrochemistry Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Electro-deoxidation Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Electrodeposition Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Electrodeposition Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Electroless Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Electrolyte The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Electromagnetic stir casting Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Electron Beam Evaporation Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Electron Microscopy Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Electrophoretic deposition Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Electroplating The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Electroplating Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Electrospinning Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Electrospinning The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Electro Spinning The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Electrospun fibers Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Emission Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Emission Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Environment Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Environmental Impact Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Epitaxial growth Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Equal Channel Angular Pressing Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Etching Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Etching rate Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Ethanol Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Ethanol Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Ethylene glycol An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
Experimental analysis Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]

F

FEM Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
FEM Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Ferroelectric KNN Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Ferroelectrics The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
Ferromagnetic BFO Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Ferrous sulfate Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Fe-TiC/Al2O3 composites The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Fiber metal laminates Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Fibers Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Filling fraction Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Filling fraction Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Finite element method Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Finite element method Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Finite element methods Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Flexible and printed electronics Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Floor Til Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025]
Flowability Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Fluorapatite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Fluorapatite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Fluorapatite Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Flutter in composites Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
Fly ash (FA) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Foam Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Forsterite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Fractal dimensions Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Fractal dimensions Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Fractal dimensions Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Fracture toughness Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Fracture toughness Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Fracture toughness Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Fracture toughness Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
Fracture toughness Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Freeze casting Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Frites K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
FT Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
FT Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
FTIR Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Functionally graded thermal barrier coating Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Functionally Graded Thermal Barrier Coating (FGTBC) Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Fused Silica Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]

G

Gallium Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Gamma-ray Shielding Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
Gas turbine The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
GDC composite Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
GdMnO3 Ceramics The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Ge Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Gelatin Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
Gelatin Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Gel-Casting Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Gene Therapy A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
GeSe Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Glass-ceramic Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Glass-ceramic Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
Glass-ceramic Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Glass-ceramic Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Glass ionomer Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Glass Sealant Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Glaze K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
GO optical band gap Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
GO-silane Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Graphene Oxide Nanoplatelet Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
Graphene Oxide thin film Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
Graphite Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Green synthesis Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Green synthesis Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Growth Temperature Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]

H

H2O Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
H2PtCl6.6H2O Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Hardness Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Hardness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Hardness An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Hardness Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
Hardness Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Hard porcelain Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Hardystonite Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Heat treatment Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
Heat treatment Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Heat treatment Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Heat treatment OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Heterogeneous nucleation Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Heterojunction Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
HF Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
HfB2 Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
HfB2-SiC-Graphite Composite Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
HfB2-SiC-Nd2O3 Composite Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
HF/H2O2 ratio Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
High Energy ball milling Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
High-entropy alloys The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Hot pressing Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
HVOF Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
HVOF Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
Hydrothermal ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
Hydrothermal method Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Hydrothermal stability An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Hydroxide Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Hydroxide precursors Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
Hydroxyapatite Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Hydroxyapatite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Hydroxyapatite Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Hydroxyapatite Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Hydroxyapatite Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Hydroxyapatite The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Hyperthermia An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]

I

Ilmenite The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Ilmenite Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Immiscible Metals Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Implant Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Implant advanced coatings The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
In In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Industrial policy Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
Infrared heating Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Injectable composite An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Injection Molding The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Interface characteristics Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Interfacial Polymerization Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Intermetallics Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
In vitro Bioactivity Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Ionic Conductivity The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Ionic Liquid Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Ion-implantation Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
IR Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
IR Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
IR transmittance Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
ITO thin films Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]

L

La2Ce2O7 Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
Laser Power Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Lead free piezoceramics Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Leakage current test A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Leucite glass-ceramic OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Li2FeSiO4 Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Li-ion batteries Effect of Fluorine Doping on LiCoO2 Cathode Material: a DFT Study [Volume 9, Issue 4, 2023, Pages 15-21]
LiNO3 electrolyte Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Liquid phase sintering Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Liquid-phase sintering The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Li Solid state electrolyte The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Lithium Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Lithium Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
Lithium-ion Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
Lithium Ion Batteries Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Lithium-ion battery Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Lithium-ion battery Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Low Voltage Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
LTSOFC Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Luminescence Properties Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]

M

Macroporous Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Magnesia Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
Magnesium Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
Magnesium The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Magnesium Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Magnesium alloy Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Magnesium titanate Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Magnetic ceramics The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Magnetic ceramics Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Magnetic hydroxyapatite Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Magnetic nanoparticle Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Magnetic nanoparticles Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
Magnetic nanoparticles Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Magnetic properties Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Magnetic properties Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Magnetic properties The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Magnetite Investigation of Different Types of Black Oxide-Forming Materials on Appearance Quality [Volume 10, Issue 4, 2024, Pages 40-45]
Magnetoviscous effect Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Manganite oxides Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
MASHS Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
MAX Phase Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Mechanical activation Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Mechanical activation Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Mechanical activation In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Mechanical milling Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Mechanical milling Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Mechanical properties Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Mechanical properties An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Mechanical properties Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
Mechanical properties The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Mechanical properties Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Mechanical properties Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Mechanical properties Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Mechanical properties Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Mechanical properties Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
Mechanical properties Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Mechanical properties Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Mechanical properties Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Mechanical properties Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Mechanical properties Electrical and Mechanical Performance of Chitosan Films Enhanced by Graphene Oxide and Silver Nanocomposites: Synthesis, Characterization, and Comparative Analysis [Volume 10, Issue 2, 2024, Pages 32-39]
Mechanical properties Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Mechanical properties Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025]
Mechanical properties OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Mechanical Property Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Mechanism Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Medical Implants Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Mesoporous silica Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Metal organic framework Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Methylene blue Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
Methyl Orange Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Mg In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
MgAl2O4 Spinel In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
MgO The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
MgTiO3 Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Micro-battery Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Micrograph Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Micron-sized SiC Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
Microstructural Analysis Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Microstructure Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Microstructure Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Microstructure Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Microstructure Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Microstructure Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
Microstructure Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
Microstructure Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
Microstructure Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Microstructure Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Microstructure Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025]
Microstructure OPTIMIZING ALUMINA LEVEL IN LEUCITE BASED DENTAL GLASS CERAMICS: CRYSTALLIZATION, MICROSTRUCTURE AND MECHANICAL PRPOERTIES [Volume 11, Issue 2, 2025]
Microstructure of sedimentation layer Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
Microwave-assisted solution combustion synthesis Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Microwave dielectric Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Microwave sintering Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
Microwave sintering Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
Microwave sintering Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025]
Milling Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Milling parameters Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
Mixed alkali effect Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
Mn-Containing Glasses In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Modifier Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
Molar Ratio The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
Molar Ratio Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Molecular Dynamics Simulation Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Monte Carlo Simulations Gamma-ray Shielding Capacity of Ceramics Tb and Fe Doped with Y2Zr2O7 [Volume 10, Issue 1, 2024, Pages 1-10]
MoS2 Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
MoSi2 Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Multiferroic composites Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
Multiferroic Materials The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Multi-layer polymer Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Multi-Principal Element Alloys The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]

N

Nafion Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Nano Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
Nano Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
Nano Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
Nano The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
Nano-alloy Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Nano and micron WO3 Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Nano array Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Nano Biocoatings In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Nanocomposite Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Nanocomposite Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Nanocomposite Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Nanocomposite Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
Nanocomposite Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
Nanocomposite Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
Nanocomposite Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Nanocomposite Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
Nanocomposite Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Nanocomposite Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
Nanocomposite Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Nanocomposite Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Nanocomposites Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Nanohybrid Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Nano-hydroxyapatite Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Nano indentation Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Nano-indentation Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Nanoindentation Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Nanoindentation Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Nanomaterials The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
Nanomaterials Structural and Magnetic Characterization of Cobalt Ferrite Nanofibers Produced by Electrospinning Method [Volume 10, Issue 3, 2024, Pages 45-51]
Nanoparticle Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Nanoparticle Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
Nanoparticle Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Nanoparticles Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Nanoparticles A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
Nanoparticles Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Nanoparticles Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Nanoparticles Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Nanoporous Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Nanoporous Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Nanoporous Membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Nanosepiolite Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Nano Sintering Additives Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Nano SiO2 Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Nano-Size Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Nanosized Materials The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Nanosphere Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Nanostructure Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Nanostructure Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
Nano-structured hard-metal Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Nanostructured materials In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Nanostructured Thermal Barrier Coatings Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Nanostructures Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Nanostructures A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Nanostructure silica An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Nano-TiO2 The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
Nanotubes Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Nanotubes lateral size Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
NASICON Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Nb2O5 Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
Ni Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
Ni Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Ni-B4C nanocomposite Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Nickel ferrite Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Ni/GDC20 Anode Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Niobium pentoxide Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Ni-P-GO Nanocomposite Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
Ni-P-TiO₂ Coating Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Nitenpyram Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
NiTi Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Novel Precursors Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Numerical Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
Numerical method Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]

O

Object detection algorithms Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
Oleic acid A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Optical band gap Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
Optical band gap Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Optical band gap Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Optical Density Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Optical Density Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Optical Glass An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Optical Glass Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Optical properties Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
Optical properties Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
Optical properties Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
Optical properties Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Optical response Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
Organosol Synthesis The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
ORR Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Osteoinduction Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Oxidation behavior Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Oxidation Resistance Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
Oxide films Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Oxide Precursor Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
Oxyfluoride An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
Oxyfluoride Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Oxy-Fluoride Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
Oxyfluoride glass The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Oxyfluoride Glass-Ceramics Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]

P

PACVD Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
PACVD Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Palladium Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
Paritially Sintered Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
PDLLA/PCL In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
PEMFC Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
Perovskite Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
Perovskite Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
Perovskite oxide Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Phase Characterization Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Phase composition The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Phase evolution Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Phase separation Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Phase stability A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
Phase stability Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Phase transformation Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
Phase transformation Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Phase transformation phase stability Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Phosphate-based glass An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Phosphate-based glass Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Phosphate Glass-ceramics Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
Phosphate Glass-ceramics Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
Phosphors Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
Photocatalysis Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Photocatalysis Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Photocatalysis Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
Photocatalytic ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
Photocatalytic activity Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets [Volume 3, Issue 4, 2017, Pages 34-40]
Photocatalytic activity Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Photocatalytic activity Ag/Zn Codoped TiO2 (AZT) Mesoporous Nanoparticles: Investigation the Optical Properties via Increasing Calcination Temperatures [Volume 10, Issue 1, 2024, Pages 34-43]
Photosensitizer Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Pickering emulsion Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Piezoceramic Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
Piezocomposite Investigation on the Band Gap of Centered Square Phononic Crystals [Volume 9, Issue 4, 2023, Pages 7-14]
Piezoelectric Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
Piezoelectric Properties Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
Plasma electrolytic oxidation Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Plasma electrolytic oxidation Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]
Plasma spray Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Plasma spray Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
PLASMA SPRAY FORMING Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
Plasma spraying In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Platinum Infiltration Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
PMN-PT Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
Poly-caprolactone (PCL) The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Polydimethylsiloxane Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Porcelain insulator A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Pore structure Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
Porogen Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
Porous Ceramics Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Porous Composite Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
Porous Network Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Potassium sodium niobate Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
Powder Metallurgy Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
Powder Metallurgy Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
Powder processing Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
Precipitation Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Pressureless sintering An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Pressureless sintering The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Protein interactions The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Pseudocapacitance Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Pseudomorphism Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
Pt-Nanoparticles Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
Pull out strength Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
Pulse electrodeposition Influence of B4C Nanoparticles on Corrosion Characteristics of Ni Matrix Nanocomposite Coatings Fabricated via Pulse Electroplating Technique [Volume 9, Issue 3, 2023, Pages 16-30]
Pulse Electroplating Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]

R

Raman Investigating the Effects of CeO2 Addition on the Structure of MgO-Al2O3-SiO2 Glass Using FTIR and Raman Analysis [Volume 10, Issue 1, 2024, Pages 18-21]
Raman spectroscopy Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Raman spectroscopy Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
Rare earth The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Rare earth element Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Rare-earth Elements An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Rate capability Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
Reaction sequence Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
Reactive Spark Plasma Sintering Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
Reactor TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
Reconstruction Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
Reduced graphene Oxide Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Reflection properties Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
Reinforcement Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Relative Density An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
Rene-80 Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
Repair Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Replacement Therapy Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Residual Stress Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
Residual Stress Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Residual Stress Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Resistive switching Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
Response Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
Response Surface Methodology Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
Retained strain The Effect of Low Temperature Heat Treatment on the Corrosion Resistance of the Electrodeposited FeCrNiCuAg0.5 High Entropy Alloy Coating [Volume 11, Issue 1, 2025, Pages 28-35]
Reverse co Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
Reverse Osmosis Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
Rheological chracteristics The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
Rheological properties An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Rheological property Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Rheology Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
Rheology Fabrication and Evaluation of a Polydimethylsiloxane-Based Elastomeric Dental Impression Material with Ceramic Fillers [Volume 11, Issue 1, 2025, Pages 7-18]
Rice husk Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
Rubber Compound Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]

S

Safavid Era Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Samarium Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Saturation magnetization Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
SBF An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Scaffold Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
Scaffold Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
Scaffolds Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Scan Rate Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
Scientometric Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Scientometrics The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Scratch Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
Se Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
Segregation The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Self-cleaning A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Self-compacting mortar (SCM) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
SEM Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
SEM The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Semiconductor Glass Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
Si In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
Si3N4 Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Si3N4 Effect of Processing Parameters and Additives on Partially Sintering of Si3N4-MoSi2 Composite [Volume 10, Issue 2, 2024, Pages 1-8]
SiAlON Composites Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
SIC Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
SIC Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
SiC powder The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
SiC-TiC The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
SILAR process Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Silica Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
Silica Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Silica Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
Silica-alumina membrane An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
Silica Vitreous Composite.Additives.Structural Analysis Investigation of the Substitution of Conventional Lead Oxide with a Lead Oxide-Silica Vitreous Composite in the Fabrication of Bi2223 Superconductor [Volume 11, Issue 2, 2025, Pages 36-41]
Silicon carbide Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
Silicon Carbide (SiC)Spark Plasma Sintering (SPS)AdditivesSinteringMechanical Properties The Effect of Metallic and Oxide Additives on Spark Plasma Sintering and Properties of Silicon Carbide Components [Volume 11, Issue 3, 2025, Pages 1-12]
Silicon nanowires Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
Silicon Pyramid Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
SILVACO Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Silver dopant Optical Properties of Flexible Nanocomposites Synthesized as Powders via the Hydrothermal Method Under Ionizing Excitations [Volume 10, Issue 3, 2024, Pages 15-22]
Simulated body fluid In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Simulated body fluide solution Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
Simulation Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
Simulation Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
Single-layer graphene oxide/Hydroxyapatite/Chitosan Corrosion Studies on the Hydroxyapatite-Gelatin-Mono Layered Graphene Oxide Nanocomposite Coating on SS316L [Volume 10, Issue 2, 2024, Pages 23-31]
Sintering Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Sintering Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
Sintering The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
Sintering Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
Sintering The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
Sintering Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Sintering Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Sintering process Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
SiO2 ceramic Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
Slag Effect of Slag on the Physical and Mechanical Properties of Microwave-Sintered Floor Tile [Volume 11, Issue 4, 2025]
Small polaron hopping Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
Sn Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
Sodium Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
SOFC Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
SOFC The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Solar Cell Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Solar Cell Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
Sol-Gel Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
Sol-Gel An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
Sol-Gel Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
Sol-Gel In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
Sol-gel method Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
Solidification Investigating the Role of Pouring Temperature, Heat Treatment and Mold Preheating Temperature on the Hardness and Microstructure of the Inner Surface of Al-15Mg2Si In Situ Composite Pipe Fabricated by Centrifugal Casting Method [Volume 9, Issue 3, 2023, Pages 1-15]
Solid oxide fuel cells Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
Solid state Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
Solid state Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
Solid-State Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [Volume 10, Issue 1, 2024, Pages 44-48]
Solid State Reaction The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
Solvent Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
Solvothermal Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
Sonochemical Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
Spark Plasma Sintering In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Spark Plasma Sintering Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
Spark Plasma Sintering Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Spark Plasma Sintering Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Spark Plasma Sintering Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
Spark Plasma Sintering Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
Spark Plasma Sintering Experimental Investigation of the Effect of Reduced Graphene Oxide Addition on the Mechanical Properties and Behavior of Ti/RGO Composites in Spark Plasma Sintering Process with Reference to Potential Applications in Medical Implants [Volume 9, Issue 4, 2023, Pages 22-31]
Spark Plasma Sintering Microstructure and Properties of Spark Plasma Sintered SiAlON Composites Derived from Novel Precursors [Volume 10, Issue 3, 2024, Pages 1-7]
Spark Plasma Sintering Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
Spark plasma sintering (SPS) Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
Spark plasma sintering (SPS) Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
Spark Plasma Sintering . Wear Rate. Wear Mechanism The Role of Diamond on Wear Properties of WC-Co Composite [Volume 9, Issue 4, 2023, Pages 1-6]
Specific cost Functionalized Sepiolite Nanocatalyst under Radiative Heating for Cyclic Biodiesel Production [Volume 10, Issue 4, 2024, Pages 25-32]
Spherical powders Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
Spinels Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Spin glass Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
SPS Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
SPS Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Sputtering Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Sputtering Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
SrFe12O19 The Influence of Diameter and Morphology on Magnetic Properties of Strontium Ferrite Nanofibers [Volume 10, Issue 2, 2024, Pages 40-46]
SS316L implant Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [Volume 9, Issue 3, 2023, Pages 31-37]
Stability Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
Starch Consolidation Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
Steel Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
Stöber method Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
Stress and Strain Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
Structural properties Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
Superalloy Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
Superparamagnetic Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
Surface analysis ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
Surface modification An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
Surface Texturing Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
Surfactants Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
Synthesis Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
Synthesis The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
Synthesis Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Synthesize Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]

T

Taguchi design Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Using Spark Plasma Sintering (SPS) and Taguchi Design [Volume 10, Issue 3, 2024, Pages 37-44]
Taguchi method Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
Taguchi method Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
Tantalum carbide Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
Tape casting Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Tape casting The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
Targeted nucleic acid delivery A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
TEC K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
Tellurite glass Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
TEM Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
TEM Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Textural Properties Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
The CAZO Thin Films Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Thermal annealing Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
Thermal barrier coating The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
Thermal barrier coatings (TBCs) A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
Thermal expansionc oefficient Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
Thermal Gradient Simulation of Residual Stress in Additive Manufacturing Process Using Finite Element Analysis [Volume 10, Issue 4, 2024, Pages 1-4]
Thermal shock Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
Thermal stability Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
Thin film Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
Thin film Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Thixotropy Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
Ti3AlC2 Effects of Ball Milling Sequences on the Reactive Synthesis of Ti3AlC2 from Ti/Al/C Powder Mixture [Volume 10, Issue 4, 2024, Pages 33-39]
Ti6Al4V Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Ti-Al-C intermetallic compound Structural and Phase Stability in the 2TiC-Al-Ti System During Milling and Subsequent Annealing [Volume 9, Issue 4, 2023, Pages 41-49]
Ti Alloy Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
TiB2 Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
TiC Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
TiCN Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Ti containing hydroxyapatite Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
Ti-Cu alloy Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
Ti-Cu alloy Effects of sintering temperature on densification, microstructure and micro-hardness of intermetallic Ti-Cu alloy prepared by mechanical alloying and microwave-assisted sintering method [Volume 10, Issue 2, 2024, Pages 17-22]
Tiles Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
Tin Oxide The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
TiO2 Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
TiO2 The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
TiO2 Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
TiO2 Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
TiO2 The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
TiO2 Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
TiO2 nanoparticles Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
TiO2 nanoparticles Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
TiO2 nanosphere Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
Tissue engineering Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
Tissue engineering The Effect of Electrospinning Parameters on the Final Structure of the Electrospun PCL Fibers [Volume 10, Issue 1, 2024, Pages 11-17]
Tissue engineering The Role of Proteins in Modulating Biocompatibility: A Comprehensive Overview of Implant Advanced Ceramic Coatings [Volume 10, Issue 3, 2024, Pages 23-36]
Tissue Regeneration Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
Titanium Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
Titanium diboride Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
Titanium dioxide Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Titanium nanotube Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
Titanium substrates Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
Topography Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
Topography Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
Toughness Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
Toughness mechanisms The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
Tragacanth An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
Tragacanth Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
Transparent Ceramic In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
Two Steps The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]

W

Waste ceramic powder (WCP) Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
Waste Management Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
WC The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
WC Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
WC-Co Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
WC–Co Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
WC–FeCrAl Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
WC–NiMoCrFeCo Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
Wear Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
Wear Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Wear Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
Wear Mechanical and Tribological Properties of Ti-6Al-4V by Deposition of Multilayered Coating with PACVD Technique [Volume 11, Issue 2, 2025, Pages 42-49]
Wear resistance Effect of Current Density on Microstructure, Mechanical, and Corrosion Behavior of Ni-P-TiO₂ Composite Coating [Volume 11, Issue 1, 2025, Pages 36-46]
Wet-chemical method A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
WO3 Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
WO3 Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
WO3.H2O Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
WO3 nanoparticles Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
WO3-rGO Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
Wollastonite In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
Wollastonite Tuning bioactivity and degradation behavior of magnesium implants using wollastonite embedded plasma electrolytic oxidation coatings [Volume 11, Issue 2, 2025, Pages 12-23]

Y

Y Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
Y2O3 dopant The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
Y3Al5O12 - MgAl2O4 Spinel Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
YAG: Cr Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
YOLOv10 Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
YOLOv7 Enhancing Ceramic Tile Production with Advanced Defect Detection: YOLOv7 vs. YOLOv10 [Volume 11, Issue 1, 2025, Pages 1-6]
YSZ Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
YSZ suspension Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
YSZ : ZrO2-8 wt. % Y2O3 A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
Yttria stabilized zirconia (YSZ) Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
Yttrium aluminum garnet Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]

Z

Ziconia Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
ZIF-67 Metal-Organic Framework (MOF) Ca-Al Layered Double Hydroxide/ZIF-67 Metal-Organic Framework (LDH/MOF) Nanocomposites for Drug Delivery Application [Volume 11, Issue 3, 2025, Pages 133-23]
Zinc oxide A Transparent and Simple Synthesis of Superhydrophobic Coating Based on ZnO Microsheet/Epoxy Resin [Volume 9, Issue 3, 2023, Pages 43-49]
Zinc oxide nanoparticles Enhancing the Electrical Properties of Bismuth Titanate Ceramics Using Zinc Oxide Nanoparticles as Sintering Aid [Volume 9, Issue 3, 2023, Pages 50-56]
Zinc Sulfide Exploring the Antibacterial Potential of Zinc Sulfide/Chitosan Nanocomposites [Volume 11, Issue 1, 2025, Pages 19-27]
Zircon The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
Zirconia Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
Zirconia nanoparticles Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
Zirconium Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
Zirconium Diboride Ceramic Particles Physical, Mechanical, and Microstructural Characteristics of Al-MMCs Incorporating Zirconium Diboride Particles Fabricated by Warm Equal Channel Angular Pressing Method [Volume 10, Issue 1, 2024, Pages 22-33]
Zirconium Oxide Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
Zn content ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
ZnO Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
ZnO Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
ZnO K, Ca, and Zn Ratios Affect Glass Frit Properties [Volume 11, Issue 2, 2025, Pages 1-11]
ZnO Sonochemical Synthesis of Highly Uniform ZnO Nanoparticles on 3D Monolithic Cordierite Honeycomb Substrates [Volume 11, Issue 1, 2025, Pages 47-53]
ZnO Photocatalythic Activity of ZnO-WO3 for Methyl Orange Degradation [Volume 11, Issue 3, 2025, Pages 24-30]
ZnO thin films Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
ZnS Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
ZnS/CdS Exploring the Potential of ZnS/CdS Dual Nanocomposites in Photocatalytic Degradation for Water Cleanup [Volume 10, Issue 4, 2024, Pages 5-14]
ZnWO4 Construction of 0D/3D ZnWO4-MoS2 Heterojunction with Enhanced Charge Carrier Separation for Decomposition of Organic Pollutants under Visible Light Irradiation [Volume 9, Issue 3, 2023, Pages 38-42]
ZrB2 Effect of Sintering Parameters on the Densification of ZrB2-SiC based Composite [Volume 10, Issue 3, 2024, Pages 8-14]
ZrB2-30 vol% SiC Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
ZrB2-SiC Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
ZrB2-SiC composites Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
ZrO2 The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
Z-X topography Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]

Advanced Ceramics Progress

Keyword Index

A

B

C

D

E

F

G

H

I

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z